Panasonic CQ-C5355N Operating Instructions Manual

Also see for CQ-C5355N:

Contents

CQ-C5355N28 CQ-C5355N 29 EnglishAudio Setting1 Press [VOL] (PUSH SEL:Select) to open the menu.2 Press [VOL] (PUSH SEL: Select) toselect a mode to be adjusted.3 Turn [VOL] clockwiseor counterclockwise toadjust.Notes:• The sequence and contents of setting items maydepend on the conditions of devices to be connected.For further information, refer to the System UpgradeGuidebook or the instruction manuals for the devicesto be connected.• To return to the regular mode, press [DISP].• If no operation takes place for more than 5 seconds inaudio setting (2 seconds in the volume adjustment,10 seconds in the SQ adjustment), the display returnsto the regular mode.• The volume can also be adjusted directly using [VOL]on the main unit. ( page 11)• Please refer to page 13 for calling up a preset SQ.• If you enable SRS WOW, the following functions areautomatically disables:· SQ· Bass/treble adjustment· Balance/fader adjustmentVolume Adjustment(Setting range: 0 to 40, Default: 18): Up: DownSRS WOW On/Off Setting(Setting range: On/Off, Default: Off): On: OffPlease refer to page 12 for SRS WOW setting.Bass Adjustment(Setting range: 12 dB to 12 dB, 2 dB Step, Default:Bass 0 dB): Up: DownTreble Adjustment(Setting range: 12 dB to 12 dB, 2 dB Step, Default:Treble 0 dB): Up: DownNote: Do not activate SQ and Bass/Treble at the sametime to avoid causing sound distortion.Adjustment to each speakerAudio Menu DisplayAudio Menu Display (continued)SQ Adjustment( page 13)(Adjustable frequency:12 dB to 12 dB (by2 dB))Setting range:SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz,200 Hz)SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz,3 kHz)SQ High/Treble: ±12 dB (at 8 kHz, 10 kHz, 12 kHz,15 kHz)Balance Adjustment(Setting range: L (left) 15 to R (right) 15 and Centre,Default: Centre): Right enhanced: Left enhancedFader Adjustment(Setting range: R (rear) 15 to F (front) 15 and Centre,Default: Centre): Front enhanced: Rear enhancedAudio Setting