Panasonic CQ-C5355N Operating Instructions Manual

Also see for CQ-C5355N:

Contents

CQ-C5355N30 CQ-C5355N 31 EnglishFunction Setting1 Hold down [VOL](PUSH SEL: Select) for2 sec. or more to openthe menu.2 Press [VOL] (PUSH SEL: Select) toselect a mode to be adjusted.3 Turn [VOL] clockwiseor counterclockwise toadjust.Notes:• The sequence and contents of setting items maydepend on the conditions of devices to be connected.For further information, refer to the System UpgradeGuidebook or the instruction manuals for the devicesto be connected.• To return to the regular mode, press [DISP].• If no operation takes place for more than 5 secondsin function setting, the display returns to the regularmode.FM Monaural Reception (FM Mode)Noise is signifi cantly decreased when weak signals arereceived from an FM broadcast station.: MONO ON: MONO OFF (Default)Local Tuning (Radio Mode)Only stations with good reception are detected in seektuning.: LOCAL ON: LOCAL OFF (Default)Region (REG) Mode (FM Mode)You can change the selection range of AF, Best StationResearch and PI seek.: The frequencyis changed only forprograms within theregion.: The frequencyis changed also forprograms outside theregion. (Default)Note: When the REG mode is switched from OFF to ONor vice versa, the AF mode turns on automatically.PTY Language Selection (RDS Mode): English (Default): SwedishFunction Menu DisplayFunction SettingDemonstrationYou can set up the monitor to display or hide thedemonstration screen.: On (Default): OffNote: Button operation with either the main unit orremote control allows users to cancel the demonstrationscreen for 20 seconds and enable the selected operationeven in the demo-on mode.Display Color SelectionYou can select display color.Default: OCEAN (aqua blue)Variety: OCEAN (aqua blue), SKY (sky blue), FOREST(green), ORANGE (amber), FIRE (red), PINK (deep pink),ROSE (pink), STORM (7 colors)OCEAN (aquablue)ORANGE(amber)STORM(7 colors)Key Color SelectionYou can select key color.Default: GREEN (Green)Variety: GREEN (Green), RED (Red): Green (Default): RedMute/AttenuationYou can select mute or attenuation.: Volume down by10 steps: Volume off (Default)External MuteYou can mute the current source with Panasonicnavigation system provides voice guidance or cartelephone conversation is in progress.(Setting range: 0 to 2, OFF)LV0 : No sound (Default)LV1 : 15 steps decreaseLV2 : 10 steps decreaseOFF : UnchangedWhen External Mute isactivated(Example: MUTE LV0)AUX1 SkipIf AUX1 is not used, the AUX1 mode is skipped whenselecting the source.: On (Skip disabled.)(Default): Off (Skip enabled.)ACC SelectionACC ON:• The power is turned on automatically when inserting adisc.• The clock can be displayed even if the power is off.: Set to ON if your carhas an ACC position.: Set to OFF if yourcar has no ACCposition. (Default)Function Menu Display (continued)Caution• Be sure to select OFF when your car hasno ACC position in the ignition switch.Failure to do this could cause the batteryto go dead.