Panasonic CQ-C9700U Operating Instructions Manual

Also see for CQC9700U - AUTO RADIO/CD DECK: Operating instructions Service manual

46 CQ-C9800/9700U CQ-C9800/9700U 47Audio Settings (continued)ENGLISH27SQ Adjustment(SQ ADJUSTMENT)Center frequency and level areadjustable in each of 9 bands. This letsyou fi ne tune sound quality for eachgenre to suit car-interior acoustics andyour personal preferences.Equalizer center frequency:62.5 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz,2 kHz, 4 kHz, 8 kHz, 16 kHz (default)Setting range: j12 dB to i12 dB(by 2 dB)1 Press [%] or [$] to select a band.[$]: Up[%]: Down2 Turn [VOLUME] to select a center frequency.[VOLUME "]: Up[VOLUME #]: Down3 Press ["] or [#] to adjust the equalizer level.["]: Up[#]: Down64975Car AudioSOURCEMUTEPOWERRANDVOL31 2DISPBANDREP6 5SETSEL#SCANMENUNUMBER80 [DISP](Display)[VOL "][VOL #][2] to [6](SQ presetbuttons)∫ To return an adjusted SQ to the defaultsettingPress and hold [BAND] for more than 2 secondsduring SQ adjustment setting.Note for SQ adjustment and preset memory:≥ To call a preset SQ, refer to page 25.≥ While the SQ adjustment mode is established,only adjustments are performed, and even if theadjustment mode is exited without presettingan adjusted effect, what has been set will berefl ected as the current SQ until another SQ isselected.≥ Even when the SQ presets are adjusted, thedisplay which appears when the settings arecalled remains unchanged.≥ Only buttons [2] to [6] can be used topreset the adjusted SQ. An adjusted SQcannot be preset in button [1].Note:≥ Press [DISP] (display) to return to the regularmode.≥ If no operation takes place for more than10 seconds in SQ adjustment and positionsettings, the display returns to the regularmode.[BAND]SQ Preset MemorySetting (SQ PRESET MEMORY)You have 6 preset modes (FLAT, POP,ROCK, VOCAL, JAZZ, CLUB). Youcan customize your settings for these(except FLAT) and save them for instantrecall.≥ Do not activate SQ and DC(bass/treble) at the same time toavoid causing sound distortion.2 Submenu1 Press ["] or [#].2 Press [SET].1 AUDIO MODEPress and hold [SQ] formore than 2 seconds todisplay “AUDIO MODE”.3 SetDisplay “AUDIOMODE”.Select∫ SQ ADJUSTMENTSelect∫ SQ PRESET MEMORY∫ POSITION(page 48)1 Press ["] or [#] to select a preset number(2 to 6).2 Press and hold [BAND] for more than2 seconds to memorize.≥ The display blinks once.≥ The adjusted SQ is preset in the number ofthe selected button.Press and hold one of the buttons from [2] to [6]for more than 2 seconds.ENGLISH28["] [#](Submenu)[%] [$](Set)