Panasonic CQ-C9701N Operating Instructions Manual

Also see for CQ-C9701N: Service manual

Contents

Panasonic CQ-C9701N Operating Instructions Manual Manual pdf 19 page image

CQ-C9901N/C9701N 3736Audio SettingAdjustment to each speaker and an optional subwooferCQ-C9901N/C9701NMain volume adjustment(Setting range: 0 to 40, Default: 18)q : Upw : DownBASS(Setting range: –12 dB to +12 dB, 2 dB step, Default: Bass 0)q : Upw : DownTREBLE(Setting range: –12 dB to +12 dB, 2 dB step, Default: Treble 0)q : Upw : DownNote: Do not activate SQ and Bass/Treble at the sametime to avoid causing sound distortion.Balance adjustment(Setting range: L15 to R15 and Centre, Default: Centre)q : Right enhancedw : Left enhancedFader adjustment(Setting range: R15 to F15 and Centre, Default: Centre)q : Front enhancedw : Rear enhancedSubwoofer level adjustment(Setting range : mute (-∞), -6 dB to +6 dB, 2 dB Step,Default: 0)q : Upw : DownSubwoofer Low Pass Filter(Setting range: Filter OFF, 60 Hz to 160 Hz, 5 Hz Step,Default 120 Hz)q : Upw : DownHigh Pass Filter(Setting range: Filter OFF, 90 Hz to 225 Hz, 5 Hz Step,Default: Filter OFF)q : Upw : DownSubwoofer output rangeOther speakers output rangesAudio Setting (when CS Auto disactivated)1 Set the CS Auto mode to off.(a page 16)2 Press [VOLUME](SEL: SELECT)to display themenu display.3 Press [VOLUME](SEL: SELECT)to select a modeto be adjusted.4 Turn [VOLUME] clockwise or counter-clockwise to adjust.Note: If no operation takes place for more than 10 sec.in the audio menu (2 sec. in Main volume adjustment),the display returns to the regular mode.Audio Setting EnglishMain volume adjustment(Setting range: 0 to 40, Default: 18)q : Upw : DownF-FOCUS (Front Focus)(Setting range: Lv 1 to Lv 10 and OFF, Default: Lv 5)q : Upw : DownR-FOCUS (Rear Focus)(Setting range: Lv 1 to Lv 10 and OFF, Default: Lv 5)q : Upw : DownF-TruBass (Front TruBass)(Setting range: Lv 1 to Lv 10 and OFF, Default: Lv 4)q : Upw : DownR-TruBass (Rear TruBass)(Setting range: Lv 1 to Lv 10 and OFF, Default: Lv 4)q : Upw : DownS.W-TruBass (Sub Woofer TruBass)(Setting range: Lv 1 to Lv 10 and OFF, Default: Lv 4)q : Upw : DownF-R MIX (Front to Rear Mixing)(Setting range: Lv 1 to Lv 10 and OFF, Default: Lv 4)q : Upw : DownAudio Setting (when CS Auto activated)1 Set the CS Auto mode to on.(a page 16)2 Press [VOLUME](SEL: SELECT)to display themenu display.3 Press [VOLUME](SEL: SELECT)to select a modeto be adjusted.4 Turn [VOLUME] clockwise or counter-clockwise to adjust.Note: If no operation takes place for more than 10 sec.in the audio menu (2 sec. in Main volume adjustment),the display returns to the regular mode.You can adjust the settings of bass sound reproduction and 3-dimensional sound field in the CS Auto mode.Notes:¡ TruBassTruBass is an audio technology to which the techniqueof bass sound reproduction used in pipe organs iselectrically applied, and in which an equalizer is notused at all and bass sound from the speakers to beused is richly reproduced.¡ FOCUSFocus is an audio technology that moves the soundimage of playing sound vertically to reproduce thesounds of instruments and voices clearly.