Panasonic CQ-C9701N Operating Instructions Manual

Also see for CQ-C9701N: Service manual

Contents

Panasonic CQ-C9701N Operating Instructions Manual Manual pdf 7 page image

CQ-C9901N/C9701NEnglishPower onPress [SRC] (PWR: POWER).Notes:¡ The opening screen appears. You can overwrite theopening screen (moving picture) with new one. (apage 40)¡ When the power is switched on for the first time, ademonstration message appears on the display. Press[DISP] to change to regular mode. (a page 10)Power offHold down [SRC] (PWR: POWER) for 2sec. or more and release it.Note: The ending screen appears at ACC on setting. Youcan overwrite the ending screen (moving picture) withnew one. (a page 40)12GeneralThis chapter explains how to turn on or off the power, how to adjust the volume, etc.CQ-C9901N/C9701N 13You can remove the faceplate to prevent it frombeing stolen.Removing1 Turn off the power. (a page 12)2 Press [ ] (Release).(The face plate disen-gages with a click whenit is removed.)The face plate automati-cally closes in 5 sec-onds if it is open or tilt-ed.Note: The power is automatically turned off whilethe unit is active.3 Put the face plate in the case.Mounting1 Slide the left side of the face plate inplace.2 Press the right end of the face plateuntil “click” is heard.Caution¡ It is recommended to remove or mount the faceplate when the plate is at the closed position.Do not remove or mount the face plate when theplate is in motion.¡ This face plate is not waterproof. Do not expose it towater or excessive moisture.¡ Do not remove the face plate while driving your car.¡ Do not place the face plate on the dashboard ornearby areas where the temperature rises to highlevels.¡ Do not touch the contacts on the face plate or on themain unit, since this may result in poor electricalcontacts.¡ If dirt or other foreign substances get on the con-tacts, wipe them off with clean and dry cloth.¡ To avoid damaging the face plate, do not push itdown or place objects on it while it is open.Open/EjectPress [ ] (OPEN).When a disc is already loaded, the disc will automaticallybe ejected.ClosePress [ ] (OPEN).TiltThe display angle changes among 4 levels as followsevery time you hold down [ ] (TILT) for 1 sec. ormore and release.Note: The last selectedangle is maintained evenafter turning off the power.Notes:¡ The volume level can be set independently for eachsource. (For radio, one volume setting for AM, onevolume setting for all FMs)¡ The volume is not adjustable while an error appearson the monitor or the external mute function isenabled. (a page 46)q Upw DownSetting Range: 0 to 40Default: 18Volume off (down)Press [ ] (MUTE).CancelPress [ ] (MUTE) again.Note: Volume-down range can be specified. (a page38)GeneralPower On/off(PWR: POWER)Face Plate Motion (Open/Close, Tilt)(OPEN/CLOSE, TILT)Volume Adjustment(VOLUME)Temporary Volume Off (Down)MUTE (ATT: ATTENUATION)Caution¡ To avoid damaging the face plate, do not push itdown or place objects on it while it is open.¡ Do not pinch your finger or hand in the face plate.¡ Do not insert foreign objects into the disc slots.¡ For the following cases, the face plate automatical-ly closes. Use caution not to catch your finger.¡ After a lapse of 20 seconds¡ When a disc is inserted¡ When the face plate is removed (a page 12)¡ Five seconds after turning off the power orturning the key to ACC OFF.TILT 1TILT 2TILT 3OPENTILT OFFFace Plate Removing/Mounting(ANTI-THEFT)SRC CSD·MSRCSRC CSD·MSRC CSD·M