Panasonic CQ-CB8901U Operating Instructions Manual

Contents

Panasonic CQ-CB8901U Operating Instructions Manual Manual pdf 15 page image

CQ-CB8901U 29 XM Tuner28XM TunerThe optional XM receiver allows you to receive the XM radio service.CQ-CB8901UOperation Flow1 Press [SRC] (Source) to select the XMSatellite Radio mode.Note: “LOADING” is displayed when it takes for 2sec. or more to receive the XM satellite radio.2 Press [BAND] to select a band.¡ Connect the optional XM receiver (XMD1000).¡ To connect the XM receiver (XMD1000), it isrequired to use an optional extension cord(XMDPAN100) that is produced by XM exclu-sively for Panasonic products.Notes:¡“RADIO ID” is displayed with channel 0.¡“UPDATING” is displayed during the update of theidentification code.¡“LOADING” is displayed during the acquisition ofaudio data or information.3 Select a channel.Channel selection[]] : Preceding channel[[] : Next channelPreset channel selection[{] (P·SET: Preset): Lower preset channel[}] (P·SET: Preset): Higher preset channelNote: Direct selection can be executed with [1] to[6] buttons on remote control.Channel Preset(P·SET: Preset)Selection by Category(P·SET: Preset)Functions Only byRemote Control UnitSRC CQ-CB8901USRCDirect AccessA channel can be directly selected.Example: channel number 51 Press [#] (NUMBER).2 Press [5].3 Press [SET].Note: To suspend direct selection, press [DISP](Display).Up to 6 channels can be preset in XM1 to XM3respectively.Preset channels can be simply called up by pressing [}](P·SET) or [{] (P·SET).Note: Direct selection can be executed with [1] to [6]buttons on remote control.1 Tune into a channel.2 Hold down [}] or [{] for 2 sec. or more.3 Select a preset number by pressing[}] or [{].4 Preset the channel by holding down [}]or [{] for 2 sec. or more.Preset number/channel number blinks once.Notes:¡ New channels overwrite existing saved channels.¡ In step 2, a channel can be stored by holding downone of the preset buttons [1] to [6] for 2 sec. or more.¡ To stop presetting channels, press [DISP] (Display).You can toggle the category on and off every time youhold down [BAND] for 2 sec. or more. If the category isset to on, the unit operates as follows for each button:Channel selection[]] (TUNE): Preceding channel in current category[[] (TUNE): Next channel in current categoryCategory selection[{] (P·SET: Preset): Preceding category[}] (P·SET: Preset): Next categoryXM Tuner ModeDisplayArtist name/Song titleBandPreset Number Channel number/nameindicates the satellite tuneris ready.TEXT Setting (XM Tuner Menu Display) 1 Press [MENU] to display the menu dis-play.For using the remotecontrol, hold down[SEL] (MENU) for 2sec. or more.2 Press [BAND] (SET) to adjust.3 Press [MENU] to confirm the adjust-ment.For using the remote control, hold down [SEL](MENU) for 2 sec. or more.TEXT: Enabled (Default): DisabledCQ-CB8901UCQ-CB8901Ulights when activated.SRC CQ-CB8901UIndicates the intensity ofthe radio wave.