Panasonic CQ-CB8901U Operating Instructions Manual

Contents

Panasonic CQ-CB8901U Operating Instructions Manual Manual pdf 19 page image

CQ-CB8901UCustomize the Display (Customize Function)You can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded fromthe Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software,IMAGE STUDIO. See “Notes on Customize function” (a page 38) as well.Note: Visit Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html) for details.CUSTOMIZE Menu Display36Display SettingAdjustment to display on the DISPLAY menuCQ-CB8901U 37 Display Setting, Customize the Display (Customize Function)Preparation:Put the CD-R/RW that contains data tobe customized in hand.1 If there is a disc inside, take out thedisc.2 Press [SRC] toselect the CDmode.3 Hold down [SEL] for 4 sec. or more todisplay the menu screen.4 Load a CD-R/RW that contains data.Note:¡ It may take time for the unit to identify the CD-R/RW.¡ Discs recorded by the packet writing software arenot supported.5 Select an item to be customized.[}][{]: Select[BAND] (SET): ConfirmNote: To exit the customize menu, hold down[SEL] 4 sec. or more.GRAPHIC PATTERNMoving image (graphic pattern) data (a page 36)STILL IMAGEStill image data (a page 36)OPENING MESSAGEMoving image at power on (a page 14)CLOSING MESSAGEMoving image at power off (a page 14)6 Select a file.[}][{][]][[]:Select[BAND] (SET): ConfirmNotes:¡ Files are automatically identified by their exten-sions, and target files are displayed.¡ If “BACK” is selected, the screen of step 5appears.7 For a moving image file or still imagefile, select where to save the file.[]][[]: Select[BAND] (SET): ConfirmNotes:¡ New data overwrites existing data.¡ If “BACK” is selected, the screen of step 6appears.8 Confirm the changed item.[]][[]: Select[BAND] (SET): ConfirmCustomization is performed. Do not turn off thepower in mid-operation. (It takes approx. 8 minutesto complete this operation for a 751 kB movingimage.) After completion of this operation, thescreen of step 5 appears.Note: If “NO” is selected, the screen of step 5appears.9 Hold down [SEL] 4 sec. or more.The CD mode comes back. Press the [OPEN] but-ton to eject the disc.DISPLAY Menu Display1 Press [MENU] to display the menu dis-play.For using the remotecontrol, hold down[SEL] (MENU) for 2sec. or more.2 Press []] or [[] to display the DIS-PLAY menu.3 Press [}] or [{] to select a function tobe adjusted.4 Press [BAND](SET) to confirmthe display.5 Adjust the setting value.6 Press [BAND] (SET).7 Press [MENU] to confirm the adjust-ment.For using the remote control, hold down [SEL](MENU) for 2 sec. or more.CQ-CB8901UCQ-CB8901UGraphic pattern setting(Setting range: 6 types, Default: All)Switching by []] or [[]ALL: Sequential display from pattern A to D.Pattern A-DS.A.: 19-band display (Spectrum analyzer)Still image setting(Setting range: 11types, Default: All)Switching by []] or [[]ALL: Sequential displayfrom pattern 1 to10No.1-10Contrast adjustment(Setting range: 1 to 5, Default: Contrast 3)[[]: Tilting up view angle[]]: Tilting down view angleClock adjustmentNote: Adjust the clock when “ADJUST” appears on thedisplay.[[]: Adjusting minutes[]]: Adjusting hours[}]: Forward[{]: BackwardNotes:¡ The graphic pattern and still image are changeable.(a page 37)¡ If corrupted data is selected, “DISPLAY FILE INCOM-PLETE” appears. (a page 38)SRCSRC