4241ENGLISHCQ-D1703N5. TV TypeTV standard format (PAL/NTSC) settingDefault: PALNote:¡Setting should be made to match the format of theconnected monitor. Select NTSC if connections aremade possible for both NTSC and PAL. If you selectPAL, a picture may be partly omitted.¡This unit is not compatible with SECAM format.8. D.Range CompressionBy compressing the range of the playback level (thedynamic range), it is possible to maintain the impactof audio even at low volumes.This function only works with Dolby Digital encodedmaterial.Default: OFF7. On-Screen MessagesThis is to select On-screen Display messages whichwill be displayed when On-screen Display is turnedoff by pressing [OSD] (a Page 30).Default: ON6. TV DisplayDisplay aspect settingDefault: WIDE9. DivX Registration(a Page 28)q Display “Setup Menu”.Press [MENU]. w Select each setting menu.Press one of the numeric buttons from [1] to [9].(Example: “6. TV Display”)1. Menu Language : English2. Subtitle Language : English3. Audio Language : English4. OSD Language : English5. TV Type : PAL6. TV Display : WIDE7. On-Screen Messages : ON8. D. Range Compression : OFF9. DivX Registration0. Exit1. Menu Language : English2. Subtitle Language : English3. Audio Language : English4. OSD Language : English5. TV Type : PAL6. TV Display : WIDE7. On-Screen Messages : ON8. D. Range Compression : OFF9. DivX Registration0. ExitUser Settings (continued)The following information explains the settings only about the disc player and displayed contents on the screen.(Only for Remote Control Unit)Note:¡Setup Menu has been arranged not for any DVDdisc but for this unit.¡Setup Menu is operable only if the disc sourcehas been selected. (No disc playing)CAR AV1 324 657 980 MUTEENTERPAUSE PLAYSTOPSRCRETPOWERSOURCETRACKRANDOMRETURN TITLETRACK / SEARCHMENUAUDIO ANGLEGRPSCANDRCSUBTITLEREPEATTITLE / CHAPTERSELOSDVOL[MENU]Numeric buttons[1] – [9][0](Finish thesetting.)[RET] (RETURN)