ENGLISH4CQ-DF402/DFX302U 13ENGLISH3CQ-DF402/DFX302U12Power and Sound Controls (Continued)VOLSCAN/APMSELBANDTUNEMUTEDISP1 2 3 4 5 6712CLOCKSOURCEREPCQ-DF402UCD RECEIVER WITH CHANGER CONTROLMOSFET 45W X 4 RANDOMOPENPWR8119 10TRACKLOUDMONO/LOCLEVLREMOTEDIMMERAudio Mode (Bass/Treble/Balance/Fader/Subwoofer)Regular ModeVolume Bass TrebleBalanceFaderSubwooferSubwoofer volume:Bass:Adjustable range: j12 dB to i12 dBTreble:Adjustable range: j12 dB to i12 dBBalance:R (right speaker) or L (left speaker)Fader:F (front speaker) or R (rear speaker)Adjustable range: 1 to 15 Balance centerAdjustable range: 1 to 15 Fader centerSubwoofer volume level:From MUTE (0) to 8DefaultInitial Time1 Press [DISP] (CLOCK).Hours2 Press and hold [DISP] (CLOCK).3 Press [% TUNE] or [$ TUNE].Minutes4 Press [DISP] (CLOCK).5 Press [% TUNE] or [$ TUNE].6 Press [DISP] (CLOCK).Note:≥ Press and hold [% TUNE] or [$ TUNE] to changenumbers rapidly.Time ResetPress and hold [DISP] (CLOCK) for more than2 seconds to activate the time setting mode to resetthe time.Then, repeat steps 3 to 6.Clock DisplayPress [DISP] (CLOCK) to switch to the clock dis-play.Broadcast station Clock displayPlaying time Clock displayIn CD player (changer) mode:In tuner mode:When the power is off:No displayClock display(Hours blink.)(Hours set.)(Minutes blink.)(Minutes set.)(End.)Note:≥ The [DISP] (CLOCK) button will not work whilethe CD player or CD changer is set to the scanplay mode. Cancel the scan play mode beforepressing [DISP] (CLOCK).The 12-hour system is used for the clock.VOLSCAN/APMSELBANDTUNEMUTEDISP1 2 3 4 5 6712CLOCKSOURCEREPCQ-DF402UCD RECEIVER WITH CHANGER CONTROLMOSFET 45W X 4 RANDOMOPENPWR8119 10TRACKLOUDMONO/LOCLEVLREMOTEDIMMERClock BasicsPress [SEL] to select the audio mode.1 Note:≥ If no operation takes place for more than5 seconds in audio mode (2 seconds in vol-ume mode), the display returns to the regu-lar mode.Press [" VOL] or [# VOL] to change eachlevel.2