Panasonic CQ-DFX572U Operating Instructions Manual

Also see for CQ-DFX572U: Operating instructions

Contents

Panasonic CQ-DFX572U Operating Instructions Manual Manual pdf 25 page image

ENGLISHCQ-DFX572U 57ENGLISH41CQ-DFX572U56ENGLISH42Anti-Theft SystemSecurity IndicatorThe security indicator blinks when the removableface plate is removed from the unit.Active the security function in the function settings.(➡ page 40)Panel Removal AlarmThis alarm sounds to warn you not to forget to re-move the panel before leaving your car. This func-tion is activated when the security indicator is on.Install Removable Face Plate1 Fit the face plate with its left hole on one of thepins provided on the main unit.2 Fit the other hold on the other pin applyingslight pressure.3 Move the face plate up and down a few times tomake sure it is secure. Then close the frontpanel and press down the right side of the faceplate until it clicks into plate.Caution:≥ This face plate is not waterproof. Do not expose it to water or excessive moisture.≥ Do not remove the face plate while driving your car.≥ Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.≥ Do not touch the contacts on the face plate or the main unit, since this may result in poor electrical con-tacts.≥ If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.≥ To avoid damaging the front panel, do not push it down or place objects on it while it is open.This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.The security indicator will blink.Place the Removable FacePlate into Case1 Switch off the power of the unit.2 Remove the removable face plate. (➡ page 56)3 Gently press the bottom of the case and openthe cover. Place the face plate into the case andtake it with you when you leave the car.1237 Removable face plate caseSecurity indicatorContactInstallation Guide (Continued)Remove the removable face plate.1 Press [OPEN]. The removable face plate willbe opened.2 Push the face plate to the left.3 Pull it out toward you.Remove the UnitScrewdriver8 Trim plateRemove the trim plate 8 with a screwdriver.1 Insert the lock cancel plates 9 along thegrooves on both sides of the main unituntil “click” is heard.2 Pull out the unit while pushing the platesfurther inside.Remove the unit pulling with both hands.12341 Open2 Push3 Pull outContactMain unitSwitch off the power of the unit.9 Lock cancel plateP.SET/DISCN 5O 6W; / 1OPENBANDTUNETRACKSET/APM[OPEN]OSFET50W X 4“Click”1 Insert2 Pull outInsert the tabend in theouter groove.

/ 28

Related manuals for Panasonic CQ-DFX572U