Panasonic CQ-RXBT490W Operating Instructions Manual

Panasonic CQ-RXBT490W Operating Instructions Manual Manual pdf 11 page image

11CQ-RXBT490W/CR-LXBT490WAudio Settings[DISP] (Display)exits from the audio menu.[VOL]selects a value in the audiomenu.(PUSH SEL: Select)selects items in the audiomenu.[{] [}]adjust the sound level inthe SQ setting mode.Preset buttons [1] through [6]select a SQ setting in the SQ selection mode or preset the current SQ adjustment in theSQ adjustment mode (by holding down one of the buttons for more than 2 seconds).1 Press [VOL] (PUSH SEL) to open the audio menu.Note: If no operation takes place for more than 5 seconds in audio setting, the display returns to the regular mode.2 Turn [VOL] clockwise or counterclockwise to selecta mode, and the press [VOL] to be adjusted. 3 Turn [VOL] clockwise (q) or counter-clockwise (w) to adjust.Volume(Setting Range: 0 to 40, Default: 18) q / w : AdjustmentBass(Setting Range: −12 dB to +12 dB by 2 dB, Default: 0 dB) q / w : AdjustmentTreble(Setting Range: −12 dB to +12 dB by 2 dB, Default: 0 dB) q / w : AdjustmentSQ Adjustment(Tone/SQ adjustable range : –12 dB to +12 dB (by 2 dB))Setting range:SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)BandFrequencyLevelq Adjust each band.q / w : centre frequency up/down[BAND] : Band selection[{] [}] : Level down/upw Hold down the numeric button [2] through[6] for more than 2 seconds, and the settingvalue is written into the desired SQ.Note: Only SQ presetting value cannot be savedin [1] button.Balance(Setting Range: 15 levels each, Default: CNT (centre)) q / w : Adjustment[SQ] (Sound Quality)[BAND]selects a band in the SQ setting mode.