15CQ-SRX7000U1ENGLISH6One-touch selection of a preset stationUp to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.Manual PresetMemoryManually save a station inthe preset memory.Select a band and frequency (step q, w and e on the previous page)q Press and hold [P•SET}] or [P•SET{] / [}] or [{] for more than2 seconds until the preset number blinks.w Press [P•SET}] or [P•SET{] / [}] or [{] to select a preset num-ber.e Press and hold [P•SET}] or [P•SET{] / [}] or [{] for more than2 seconds to memorize.The display blinks once, and a receiv-ing station is saved in the memory.Note: Frequency setting can be performed even after selecting a preset num-ber.Entering numbers directly from the remote controlSelect a band and frequency (step q, w and e on the previous page)Press and hold [1] to [6] on the remote control for more than 2 seconds.Auto PresetMemoryAutomatically save strongstations in the presetmemory.Select a band (step q, w on the previous page)Press and hold [BAND] for more than2 seconds.¡The 6 strongest available stations will be automatically saved in the memoryunder preset numbers 1 to 6.¡Once set, the preset stations are sequentially scanned for 5 seconds each.¡To stop the scanning, press [P•SET}] or [P•SET{] / [}] or [{].(Pressing [1] to [6] on the remote control also can stop the scanning.)Preset StationCallingSelect a band (step q, w on the previous page)Press [P•SET}] or [P•SET{] / [}] or [{] to select the preset numberfor tuning in the preset station.Press [1] to [6] on the remote control.Note: New stations are overwritten on existing saved stations after following this procedure.Entering numbers directly from the remote controlScanning