Panasonic CQ-VA7800N Operating Instructions Manual

Panasonic CQ-VA7800N Operating Instructions Manual Manual pdf 12 page image

2919ENGLISH20ENGLISH28 CQ-VA7800N CQ-VA7800N3 SettingVOLVOLVOLNAVINAVIGATIONASPASPECTTILTMUTEMUTEMUTEDISP P SCRLSCROLLP • MODEENTERMODEPOWERMENUIN-DASH 7 INCH WIDE COLOR LCD TV WITH RECEIVERCQ-VA7300NLOUDCHANNEL/TRACKDISCOPEN / CLOSECQ-VA7800NENTERMODE MENU1 2[ENTER][}] [{][] ] [[ ](Select/adjust)[MENU][MODE](End)User SettingsMenu SubmenuDisplay UnitTILT (Tilting angle adjustment)Default: 5Setting range: 1 to 5OPEN/CLOSEAutomatic monitor open/close in accordancewith ACC ignition switch on/offDefault: MANUAL[]] [[]Tilting angle adjustmentPress []] or [[] to select the setting.Monitor setup: no interlock between display open/close and ACC on/off: interlock between display open/close and ACC on/offNotes:¡The display position setting menu can also be displayed by pressing the[TILT] button on the display unit for more than 2 seconds. (a page 19)¡The monitor movable range may be limited by a type of car, a position wherethe display is mounted, etc.AUTOMANUALOPEN/CLOSE54321TILTq Press [}] or [{] toselect “DISPLAY UNIT ”.w Press [ENTER] to set.DISPLAY UNITq Press [}] or [{] toselect “CLOCK”.w Press [ENTER] to set.CLOCK*Make selection and adjustment.*Make a selection.Clock display: clock display ON ([0:00] is displayed before adjustingthe clock.): clock display OFFAdjusting the clock manually: Press []] to adjust the hour.: Press [[] to adjust the minute.Notes:¡To change numbers rapidly while adjusting cock, hold []] or [[].¡The clock starts by pressing [MODE] or [MENU] after clock adjustment.00/M0/HADJUSTOFFONDISPLAYClock SettingDefault: DISPLAY...OFFADJUST...0/H, 00/MNotes:¡The clock starts after the unit returns to theregular mode by pressing [MODE].¡The 24-hour clock system is adopted.¡Press [MODE] (End) to close the main menu and the setting/adjustingmenu.¡Press [MENU] in the setting/adjusting menu to return to the mainmenu mode.21q [}] and [{] buttons move thecursor vertically.w [[] and []] buttons move thecursor horizontally.e To set, press [ENTER].*Making selection and adjustment on the Menu.PWRMODECH 114780#ENTERMUTELOUDVOLUMECAR AVNAVINAVIGATIONSCROLLDISPASPECTMENUP·MODE95623RANDOM SCANREPEATCH 2ENTERMENU[}] [{][] ] [[ ](Select/adjust)[ENTER][MODE] (End)[MENU]q Press [MENU] todisplay the menu.w Press [[] or []] toselect “USER”.TVSCREENSOUNDUSERNote: “TV” can not beselected in the modes otherthan TV mode.