Panasonic CQ-VD7001W Operating Instructions Manual

Contents

Panasonic CQ-VD7001W Operating Instructions Manual Manual pdf 35 page image

70 71CQ-VD7001W CQ-VD7001WSpecificationsGeneral¡Power supply : 12 V DC (11 V – 16 V), testvoltage 14.4 V, negativeground¡Current consumption : Less than 10 A (during discplayback)¡Maximum power output : 50 W x 4 ch¡Compatible speakerimpedance : 4 Ω¡Video input signal : Composite video signal, 1.0Vp-p (75 Ω)¡Audio input sensitivity : 2 Vrms¡Video output signal : Composite video signal, 1.0Vp-p (75 Ω)¡Pre-Amp output voltage : 2 Vrms¡Pre-Amp output impedance : Less than 600 Ω¡Dimensions (W x H x D) : 178 x 50 x 165 mm¡Weight : 2.4 kgFM stereo radio¡Frequency range : 87.5 MHz – 108 MHz¡Usable sensitivity : 12.2 dBf¡Stereo separation : 40 dB (1 kHz)¡S/N ratio : 63 dBAM stereo radio¡Frequency range : 531 kHz – 1 602 kHz¡Usable sensitivity : 25 dB/μV¡Image rejection ratio : 50 dBAudio section¡Output voltage/Impedance: 2 Vrms/600 Ω¡Frequency characteristics(when “LARGE” is selected)Front L/R, Center, Rear(surround) L/R : 20 Hz – 20 kHz (±1 dB)¡Delay time• Dolby DigitalCenter : 0 – 5 msRear (surround) L/R : 0 – 15 ms• Dolby Pro LogicRear (surround) L/R : 15 – 30 ms• DistortionFront L/R(1 kHz, 0 dB, PCM input) : 0.01 %¡Dynamic range : 96 dB (during CD playback)¡S/N ratio : 100 dB (during CD playback)Monitor¡Liquid crystal panel : 7” wide¡Screen dimensions(W x H x D) : 154 x 87 x 177 mm¡Number of pixels : 336 960 pixels (234 vertical x480 horizontal x 3)¡Valid pixel ratio : Over 99.99%¡Display method : Transparent color filter format¡Drive method : TFT (Thin Film Transistor)active matrix format¡Light source : Internal light (Built-in smallfluorescent lamp)Note:¡Specifications and the design are subject to modification without notice due to improvements in technology.¡Some figures and illustrations on this manual may be different from your product.

/ 35

Related manuals for Panasonic CQ-VD7001W