Panasonic CQ-VD7003W2 Operating Instructions Manual

Panasonic CQ-VD7003W2 Operating Instructions Manual Manual pdf 38 page image

3839CQ-VD7003WEnglish¡The conventional displayimage has a 4 to 3 ratio ofhorizontal to vertical.¡In this case, a blank arearemains on the right and leftsides of the display.NORMAL¡The screen is extended hori-zontally as a whole to theaspect ratio of 16 to 9.¡The extension ratio is thesame at any point of thescreen.FULL¡The screen is fully extended atthe normal aspect ratio of 4 to3.¡The top and bottom of thescreen are slightly cut.ZOOM¡The screen is extended hori-zontally to the aspect ratio of16 to 9.¡The extension ratio increasestoward the right and left endsof the screen.JUSTNote:¡This adjustment is common to video mode.¡You cannot change the aspect in the menu screen and ascreen in the CD, MP3/WMA, radio and CD changermode. These are fixed to “FULL” as well as a NavigationImage.¡When the rear view camera is in operation with thetransmission gear shift in the reverse position, theimage is shown on the “FULL” screen only.¡In some cases, the picture looks different from theoriginal one due to your selection of aspect.Caution¡This is to remind you that compression or extensionof the screen using the aspect ratio (screen mode)changing function of this product for commercialpurpose of profit making or viewing/listening by thepublic could infringe on the rights of the author pro-tected by the copyright law.¡If you expand normal picture (4 to 3) by using“JUST”, “ZOOM” or “FULL” aspect to the full of thescreen, you might not see the periphery of the pic-ture, or you might see a distorted picture.Therefore, use the “NORMAL” mode to see the orig-inal picture as the author intended it.ENTERTILT O / CASPMUTE SRC MENUCQ-VD7001UNAVIOPEN / CLOSEASPECTPWRVOLP·MODECLOSECQ-VD7003WTILTTEXT❑ Aspect RatioDefault: NORMALMode: 4 typesPress and hold [ASP] on the display unit to change theaspect ratio as follows.[ASP]Other Settings