4647CQ-VD7005UEnglish❑ Product ServicingIf the suggestions in the charts do not solve the problem,we recommend that you take it to your nearest authorizedPanasonic Servicenter. The product should be servicedonly by a qualified technician.❑ Replacing the FuseUse fuses of the same specified rating (15 A). Using dif-ferent substitutes or fuses with higher rating, or connect-ing the product directly without a fuse, could cause fire ordamage to this unit.If the replacement fuse fails, contact your nearestPanasonic Servicenter for service.❑ If the Unit Begins toMalfunction...Reset switchInsert a hard, slender stick into the hole and push theswitch.ImportantPush the switch only when the unit fails to operate withany buttons. (Stored settings and adjustments are notcleared.)If the unit fails to return to normal condition, call the near-est Panasonic Servicenter and ask for repairs.Note:¡If the ID-CODE has been already set, you will be asked toenter the ID-CODE right after the unit is restarted.ENTERTILT O / COPEN / CLOSETEXTReset switchMaintenance ❑ Cleaning this UnitWhen the unit is dirty, wipe the surface of the displayusing the Wiping Cloth (supplied).Cleaning without the supplied cloth1 Moisten the soft cloth in dishwashingsoap diluted with water and wring well.2 Wipe lightly. Go over the same surfacewith a dry cloth.Note:¡Since there is the possibility of water drops gettinginside of the unit, do not directly apply cleanser to thesurface.¡Do not scratch the screen with your nails or other hardobjects. The resulting scratches or marks will obscurethe images.❑ Caution on CleaningYour product is designed and manufactured to ensure aminimum of maintenance. Use a dry soft cloth for routineexterior cleaning. Never use benzine, thinner or other sol-vents.AlcoholPesticideWaxBenzineThinnerCaution¡If water drops or similar wet substances get insidethe monitor, it may cause a malfunction.AlcoholPesticideWaxBenzineThinner