4731ENGLISHCQ-VD7700U/VD7500U4630ENGLISHCQ-VD7700U/VD7500UManual PresetMemoryRadioNote: New stations overwrite existing saved stations after following this procedure.Touch and hold.to for more than 2 seconds.Press and hold [1] to [6] on the remotecontrol for more than 2 seconds.❑ One-touch Selection of a StationUp to 6 stations can be saved in each FM1, FM2, FM3 and AM preset station memories.Operations Panel RemoteAuto PresetMemory Touch and hold for more than 2seconds.Press and hold [ENTER] for more than2 seconds.Preset StationCalling Touch to . Press [1] to [6] on the remote control.Select a band and frequency (step w and e on the previous page).Select a band. (step w on the previous page)Select a band. (step w on the previous page)The frequency blinks once, and the station is saved in thememory.¡The 6 stations with good reception will be automatically saved in the memoryunder preset numbers 1 to 6.¡Once set, the preset stations are sequentially scanned for 5 seconds each.¡To stop the scanning, touch or press numbers [1] to [6].ENTERTILTOPENVOLUME MUTE NAVI DISPCQ-VD7700UMODEOPEN / CLOSEDISCPOWER ASPECTP ·MODENAVIGATIONSD CARDTRACK/CHANNELASPIN-DASH 7" WIDESCREEN COLOR LCD MONITOR TV / DVD / SD RECEIVEROPEN / CLOSECQ-VD7700UTILTENTERMODEBandStereo indicatorMode display[MODE][]] [[] (Tuning)[ENTER] (Band)FrequencyENTERPWR NAVI MODE MENUCHAPTERASPECTP-MODETRACKNAVIGATIONSTOPTOP MENUDVD / SD MENUST/ MONOCH1 CH2RANDOMRETURNOSDRETRANDAUDIO ANGLEREPSUBSPACE MUTEVOLGRPDISP1 2 34 5 67A809PAGESCANPAUSE PLAYSUBTITLEREPEAT SCROLLTITLE / CHAPTERVOLCAR AV1 2 34 5 6MODE[1] to [6](Preset memory)[]] [[](Tuning)[ENTER](Band)[MODE] Radio ModeTouch ..Press [MODE] to change to radio mode.RemotePanelBandTouch , , or .Press [ENTER] to change band.Note: The stereo indicator lights duringreception of an FM stereo broadcast.RemotePanel12TuningTouch TUNE : upTUNE : down[[]: up[]]: downTouch/press and hold [[] or []] for more than 0.5 seconds,then release. Seeking will start and stop at next available sta-tion.RemotePanel3FM1FM2FM3AMBand SelectionWhen not in operation mode, Touch the center of touch panel [Area A] to show operation display. (a page 24)