Panasonic CQ-VX220L Operating Instructions Manual

Panasonic CQ-VX220L Operating Instructions Manual Manual pdf 42 page image

42 CQ-VX220L41 English Troubleshooting (continued)■ CD■ RadioPoor reception or noiseAntenna installation or wiring of antenna cable is faulty.aCheck whether the antenna mounting position and its wiring are correct. Inaddition, check to see whether the antenna ground is securely connected tothe chassis.No power is supplied to the antenna amplifier (when using a film antenna, etc.).aCheck the wiring of the antenna power lead.The number of autopreset stations is lessthan 6.The number of receivable stations is less than 6.aMove to an area where receivable stations number is maximum, and trypresetting.Preset stations cannotbe stored.The contact of the battery lead is poor, or the battery lead is not always powered.aMake sure that the battery lead is connected securely, and preset stationsagain.Sound skipping or noise There is a flaw or foreign object on the disc.aRemove the foreign object, or use a flawless disc.No playback or discejectedThe disc is inserted upside down.aInsert a disc correctly.There is a flaw or foreign object on the disc.aRemove the foreign object, or use a flawless disc.Sound skipping due tovibrationThe unit is not sufficiently secured.aSecure the unit to the console box.The unit is tilted at over 30˚ in the front-to-end direction.aMake the angle 30˚ or less.Disc unejectableSomething such as a peeled label obstructs the disc coming out.aPress and hold the [u] for more than 10 seconds (disc forced ejection). Ifthe disc forced ejection does not work, consult your dealer.The microcontroller in the unit operates abnormally due to noise or other factors.aUnplug the power cord and plug it again. In case the unit is still out oforder, consult your dealer.The picture is dark. Thepicture is whitish. Somethingis wrong with the picture.The picture is light in color.The screen is not adjusted properly.aMake every adjustment on the screen.The display does not goback into the unit.The monitor stops on the way to the home position.aPress [OPEN].■ Display Settings■ Common (continued)Outputdisabled/distortedvideo/audio.The conversion cable for AV 1 IN supplied with this unit is not used for theterminal of AV1 IN.aUse the conversion cable for AV 1 IN supplied with this unit for theconnection.