10POWER/AVSTIMERECONAVIAUTO COMFORTNANOE-GPOWERFUL/QUIETCleaning instructionsTo ensure optimal performance of the unit,cleaning has to be carried out at regularintervals. Please consult authorised dealer.• Switch off the power supply and unplug beforecleaning.• Do not touch the aluminium fin, sharp parts maycause injury.• Do not use benzine, thinner or scouring powder.• Use only soap ( pH 7) or neutral householddetergent.• Do not use water hotter than 40 °C.Indoor unitWipe the unit gently with a soft,dry cloth.Human activity sensorDo not hit or violently press or poke it with a sharpobject. This can lead to damage and malfunction.Front panelWash gently and dry.Remove the front panelPOWER/AVSTIMERECONAVIAUTO COMFORTNANOE-GPOWERFUL/QUIETRaisePull out12Close it securelyFor CS-C18PKF-3, CS-C24PKF-3:Press at center of the front panel.4POWER/AVSTIMERECONAVIAUTO COMFORTNANOE-GPOWERFUL/QUIETInsert atboth sides1Press both ends ofthe front panel3Close down2nanoe-G GeneratorEvery 6 months• Clean with dry cotton bud.• Do not touch during operation.Air fi ltersEvery 2 weeks• Wash/rinse the filters gentlywith water to avoid damage tothe filter surface.• Dry the filters thoroughly under shade, awayfrom fire or direct sunlight.• Replace any damaged filters.Remove air fi lter Attach air fi lterInsert into the unitFor seasonal inspection after extendednon-use• Checking of remote control batteries.• No obstruction at air inlet and air outlet vents.• After 15 minutes of operation, it is normal tohave the following temperature differencebetween air inlet and air outlet vents:COOL: ≥ 8 °CFor extended non-use• Activate nanoe-G operation for 2~3 hours as analternative to remove moisture left in the internalparts thoroughly to prevent mould growth.• Turn off the power supply and unplug.• Remove the remote control batteries.Aluminium finFront panelAir filtersIndoor unitHuman activitysensornanoe-GGenerator