8Operation modeCOOL: Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode.DRY : Unit operates at low fan speed to give a gentle cooling operation.To learn more...ECONAVI and AUTO COMFORTECONAVI AUTOCOMFORTorThe unit will start to initialise(for approximately 1 minute)The human activity sensorand the sunlight sensor willstart to detect.NoteAIR SWING When manual AIR SWING is selected,the ECONAVI and AUTO COMFORToperations will be cancelled.Human activity sensor operationLow activity Normal activityHumanModeSettemperatureHigh activity AbsentECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy.Low activity Normal activityHumanModeSettemperatureHigh activity AbsentSetFan SpeedAUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep humancomfortable consistently.eCOOL/DRYCOOL/DRY+1 °C+2 °C-1 °C+1 tap+2 °C+1 °C* During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached.** During human absence, maximum fan speed for COOL/DRY mode is medium fan.nanoe-G in-fi lter deactivationDepending on the unit’s accumulated operation time, nanoe-G in-filter deactivation may activate only once a day afterthe unit turned off.To remove the moisture left in the internal parts, the fan will operate for 30 minutes with louver opened slightly. Thisprocess only applicable when the unit is operated in COOL/DRY mode before turned off. Then, nanoe-G deactivatesviruses/bacteria on the filter for 2 hours with fan stopped and louver closed.Do not turn off the power supply during this operation. After power failure, this operation will not resume.