Panasonic CS-F14DD3E5 Service Manual

Also see for CS-F14DD3E5: Operating instructions

Contents

Panasonic CS-F14DD3E5 Service Manual Manual pdf 16 page image

REMOTEThe OFF/ON button cannot be used.LOCALAll wired remote control buttons can be used.Time/time setting displayCheck displayFan speed displayOperation mode selection displayFILTER RESET display(Appears after the cumulative running time reachesapproximately 2,500 hours of operation.)Temperature setting display (16°C - 31°C)Airflow direction setting displayOFF/ON buttonUsed to start and stop the operation.FAN SPEED buttonUsed to select the fan speed of high (HI), medium (MED), low(LO) or auto (AUTO).MODE buttonUsed to select the operation of AUTO, HEAT, FAN, COOL, orDRY.TEMP (UP/DOWN) buttonsUsed to select the desired temperature.AIR SWING (AUTO/MANUAL) buttonsUsed to determined the air swing condition, either auto ormanual.FILTER RESET buttonPress to reset the “FILTER RESET” display after washing thefilter.TEST RUN button*VENTILATION button*ECONOMY operation buttonProvides Energy saving functionODOUR WASH buttonProvides deodorizing function.CHECK buttonPress this button if the check display is flashing.TIMER/CLOCK SET buttonsUsed to set the timer operation and the current time.Operation indicatorLights up when the unit in operation.8 WIRED REMOTE CONTROL OPERATING INSTRUCTIONS8.1. Name and function of each partNOTES• Ensure that the correct button is pressed as simultaneous pressing of the multiple buttons will not make the setting correct.• The illustration above is for explanatory purposes only. The appearance will be different during actual operation.• Do not operate the remote control with wet hands. Otherwise, electric shock or malfunction may occur.• Do not press the remote control buttons with sharp object as this may damage the remote control.• Buttons marked with * are not needed for normal operation. If one of these buttons is pressed by mistake, press the samebutton once more to cancel the operation.• When the power resumed after power failure, the unit will restart automatically with all the previous settings preserved bythe memory function. (Auto restart function)• Buttons marked with are not available for operation. If one of these buttons is pressed function will not be available.16