Final Display of Daily Timer:8.7. Weekly timer setting• Display• How to Set Weekly Timer− You can set the Timer for 1 week (Monday to Sunday) with 6 programs per day.− ON-Timer can be set together with your desired temperature. However, this temperature will be used continuously.− Cannot set 2 programs with same time setting in a day.− You also may select Collective - many days with same time setting or Individual− single/one day setting.1. Change DisplayPress “MODE button” to change the display to weekly timer.2. Select Day (please refer to next page for example of setting)You may select Collective or Individual day setting.• Collective day setting.Press “SELECT button”: display will show day selection setting.Press “UP or DOWN button” to select the day. Then press “SET button” to delete triangle mark(deselect) or add triangle mark (select).(Triangle mark on top of each day indicates the day to be selected).Repeat these steps if you want to deselect or select many days.To confirm the selected days, press the “SELECT button”.• Individual day setting.Press “UP or DOWN button” to select the day.Then press “SELECT button”.3. Select Time (please refer to next page for example of setting)For 1st program setting.Press “UP or DOWN button” to select ON or OFF.Then press “SET button” to confirm.Press “UP or DOWN button” again to select the desired time.(If you want to set them together with your desired temperature, press “TEMP UP/DOWN button” toselect the temperature).Then press “SET button” to confirm.Or press “CANCEL button” if you do not want to set any time.For 2nd ~ 6th program you may refer to the above step.21