Panasonic CS-KS18NKU Operating Instructions Manual

Also see for CS-KS18NKU: Technical & service manual

Contents

Panasonic CS-KS18NKU Operating Instructions Manual Manual pdf 20 page image

20ADJUSTING THE AIRFLOW DIRECTION1. Horizontal The horizontal airflow can be adjusted by moving the vertical vanes with yourhands to the left or right.When the humidity is high, the vertical vanes should be in the frontposition during the cooling or dehumidifying operation. If the verticalvanes are positioned all of the way to the right or left, condensation maybegin to form around the air vent and drip down.2. Vertical The vertical airflow can be adjusted by moving the flap with the remote controller.Do not move the flap with your hands. Confirm that the remote controller hasbeen turned on. Use the FLAP button to set either the sweep function or one ofthe six airflow direction settings.• The flap automatically closes when the unit is off.• Use the FLAP button on the remote controller to adjust the position ofthe flap. If you move the flap by hand, the flap position according to theremote controller and the actual flap position may no longer match. Ifthis should happen, shut off the unit, wait for the flap to close, and thenturn on the unit again; the flap position will now be normal again.• Do not have the flap pointed down during cooling operation.Condensation may begin to form around the air vent and drip down.CAUTIONA. Sweep functionThe flap starts moving up and down todeliver air over the sweep range.C. Auto flap functionThe flap is set to the recommendedposition.B. Setting the airflow manuallyReferring to the above illustration, use theFLAP button to set the airflow directionwithin the range used during the cooling ordehumidifying operation.COOLDRYFANSWEEPNOTECAUTION