Panasonic CS-KS30NKU Installation Instructions Manual

Also see for CS-KS30NKU: Technical & service manual Operating instructions

Panasonic CS-KS30NKU Installation Instructions Manual Manual pdf 17 page image

163-5. Shape the Indoor Side Tubing(1) Arrangement of tubing by directiona) Right or left tubingCut out the corner of the right/left frame with ahacksaw or the like. (Figs. 20 and 21)b) Right-rear or left-rear tubingIn this case, the corner of the frame need not becut.(2) To mount the indoor unit on the rear panel:Hang the 3 mounting slots of the unit on theupper tabs of the rear panel. (Fig. 22)3-6. Wiring InstructionsGeneral precautions on wiring(1) Before wiring, confirm the rated voltage of the unit asshown on its nameplate, then carry out the wiringclosely following the wiring diagram.(2) Provide a power outlet to be used exclusively foreach unit, with a power supply disconnect and cir-cuit breaker for overcurrent protection provided inthe exclusive line.(3) To prevent possible hazards due to insulation failure,the unit must be grounded.(4) Each wiring connection must be done tightly and inaccordance with the wiring system diagram. Wrongwiring may cause the unit to misoperate or becomedamaged.(5) Do not allow wiring to touch the refrigerant tubing,compressor, or any moving parts of the fan.(6) Unauthorized changes in the internal wiring can bevery dangerous. The manufacturer will accept noresponsibility for any damage or misoperation thatoccurs as a result of such unauthorized changes.FrameRight tubingoutlet8(3,,-::;)04.5;:2,:Fig. 21Fig. 22Fig. 20