Panasonic CS-KS30NKU Operating Instructions Manual

Also see for CS-KS30NKU: Technical & service manual Installation instructions

Contents

Panasonic CS-KS30NKU Operating Instructions Manual Manual pdf 11 page image

117. UNOCCUPIED ModeUnoccupied mode is used to prevent the room temperature fromincreasing too much when no one is in the room, and operateautomatically to save energy.Press the UNOCCUPIED button.The mark appears in the display.To release the unoccupied function, press the UNOCCUPIED buttonagain.Unoccupied IndicationEven if Unoccupied Mode is ON, it will be disabled if the airconditioner is in operation.• Unoccupied Function can be set and released through alloperational modes, regardless of whether the air conditioner isoperating or not.• If the Unoccupied Function is ON and the remote controller is usedto turn the air conditioner OFF (including OFF TIMER), the airconditioner will turn off, but depending on the room temperature,Cooling Operation will automatically begin.• When the Unoccupied Function is in operation and the ON/OFFoperation button is pressed, operation will restart based on thesettings input before the air conditioner was turned off.In Cooling Mode: ( )• Unoccupied Mode triggers Cooling Operation in response to theroom temperature, but when this happens, the remote controllerwill continue to display the Operation mode set by the user.• If the room temperature rapidly changes, the room temperaturemay get over the upper or lower limit when the unoccupied functionis activated.• The remote controller should be used in the location specified in“REMOTE CONTROLLER INSTALLATION POSITION” on page 8.• The air conditioner’s stop order (stated in (2) / above) is valid onlywhen the unoccupied function is operated.UnoccupiedFunctionUnoccupiedIndication StatusOFF no display The unoccupied function is not set.ON flashingThe unoccupied function is nowbeing set, and under Coolingoperation.lightingAlthough the unoccupied function isset, not under Cooling operation.NOTE(1)898682 (2)RoomTemperature (°F)CoolingstartsTimeCoolingstops(1) When the room temperature rises above 89°F, CoolingOperation will begin.(2) When the room temperature drops below 82°F, CoolingOperation will stop.The above actions will repeat so that the room temperature ismaintained at about 86°F.NOTE