Panasonic CS-ME7QKUA Service Manual

Also see for CS-E12NKUAW: Information Quick guide Operating instructions Operating instructions Installation manual

Panasonic CS-ME7QKUA Service Manual Manual pdf 17 page image

1711.2 Indoor Unit11.2.1 How to Fix Installation PlateThe mounting wall shall be strong and solid enough to prevent it from the vibration.The center of installation plate should be at more than  at right and left of the wall.The distance from installation plate edge to ceiling should more than .From installation plate left edge to unit’s left side is .From installation plate right edge to unit’s right side is .○B : For left side piping, piping connection for liquid should be about  from this line.: For left side piping, piping connection for gas should be about  from this line.1 Mount the installation plate on the wall with 5 screws or more (at least 5 screws).(If mounting the unit on the concrete wall, consider using anchor bolts.)o Always mount the installation plate horizontally by aligning the marking-off line with the thread and usinga level gauge.2 Drill the piping plate hole with ø2 3/4" (ø70 mm) hole-core drill.o Line according to the left and right side of the installation plate. The meeting point of the extended line isthe center of the hole. Another method is by putting measuring tape at position as shown in the diagramabove. The hole center is obtained by measuring the distance namely 5 1/16" (128 mm) for left and righthole respectively.o Drill the piping hole at either the right or the left and the hole should be slightly slanting to the outdoorside.11.2.2 To Drill a Hole in the Wall andInstall a Sleeve of Piping1 Insert the piping sleeve to the hole.2 Fix the bushing to the sleeve.3 Cut the sleeve until it extrudes about 19/32"(15 mm) from the wall.1 Finish by sealing the sleeve with putty orcaulking compound at the final stage.