Panasonic CS-ME7QKUA Service Manual

Also see for CS-E12NKUAW: Information Quick guide Operating instructions Operating instructions Installation manual

Panasonic CS-ME7QKUA Service Manual Manual pdf 28 page image

28 For the 2nd judgment onwardso If indoor intake temperature - remote control setting temperature  5.4°F, if previous operate in DRY mode,then continue in DRY mode, otherwise COOL mode is decided.o If -3.6°F ≤ indoor intake temperature - remote control setting temperature < 5.4°F, maintain with previousmode.o If indoor intake temperature - remote control setting temperature < -3.6°F, HEAT mode is decided.13.5 Indoor Fan Motor Operation13.5.1 Residual Heat Removal Control To prevent high pressure at indoor unit, when heating mode thermostat-off condition or power supply OFF,indoor fan continue to operate at controlled fan speed for maximum 30 seconds then stop.13.6 Powerful Mode Operation When the power mode is selected, the internal setting temperature will shift lower up to 39.2F for Cooling/SoftDry or higher up to 42.8°F for heating than remote control setting temperature, the powerful operation continueuntil user cancel the Powerful operation by pressing powerful button again.13.7 Auto restart control When the power supply is cut off during the operation of air conditioner, the compressor will re-operate betweenthree to four minutes (10 patterns to be selected randomly) after power resume. During multi split connection, Indoor unit will resume previous mode, include unit standby mode.13.8 Indication PanelNote: If POWER LED is blinking (0.5 second ON, 0.5 second OFF), the possible operation of the unit are during IndoorResidual Heat Removal, Hot Start, during Deice operation, operation mode judgment, or ON timer sampling. If POWER LED is blinking (2.5 seconds ON, 0.5 second OFF), the unit is in standby mode. If TIMER LED is blinking, there is an abnormality operation occurs.