52. SpecificationModel Indoor/Outdoor CS-MPS9SKH / CU-2S18SKH CS-MPS12SKH / CU-2S18SKHPerformance Test Condition JIS JISPower Supply Phase, Hz Single, 50 Single, 50V 220 240 220 240Min. Mid. Max. Min. Mid. Max.CoolingCapacitykW 1.10 2.80 3.50 1.10 3.20 4.00BTU/h 3750 9550 11900 3750 10900 13600kJ/h 3960 10080 12600 3960 11520 14400Running Current A 3.65 3.40 4.50 4.20Input Power W 220 750 1.00k 220 920 1.22kEER W/W 5.00 3.73 3.50 5.00 3.48 3.28kJ/hW 18.00 13.44 12.60 18.00 12.52 11.80Indoor Noise (H / L / QLo) dB-A 40 / 29 / - 44 / 32 / -Indoor FanType Cross-flow fan Cross-flow fanMaterial ASG20K1 ASG20K1Motor Type AC / Induction (4 poles) AC / Induction (4 poles)Input Power W 51 - 58 51 - 58Output Power W 24 24SpeedLo rpm 680 720Me rpm 840 890Hi rpm 1000 1060Moisture Removal L/h 1.6 1.8Indoor AirflowLo m 3/min (ft3/m) 6.90 (244) 6.95 (245)Me m 3/min (ft3/m) 8.26 (292) 8.92 (315)Hi m 3/min (ft3/m) 10.10 (355) 10.90 (385)DimensionHeight (I/D) mm (inch) 290 (11-7/16) 290 (11-7/16)Width (I/D) mm (inch) 870 (34-9/32) 870 (34-9/32)Depth (I/D) mm (inch) 214 (8-7/16) 214 (8-7/16)Weight Net (I/D) kg (lb) 9 (20) 9 (20)Piping Pipe Diameter(Liquid / Gas) mm (inch) 6.35 (1/4) / 9.52 (3/8) 6.35 (1/4) / 9.52 (3/8)Drain Hose Inner Diameter mm 16.2 16.2Length mm 550 550Indoor HeatExchangerFin Material Aluminium (Pre coated) Aluminium (Pre coated)Fin Type Slit Fin Slit FinRow x Stage xFPI 2 x 15 x 17 2 x 15 x 17Size (W x H x L) mm 610 x 315 x 25.4 610 x 315 x 25.4Air Filter Material Polypropelene PolypropeleneType One-touch One-touchPower Supply Outdoor OutdoorPower Supply Cord A - -Thermostat - -Protection Device - -DRY BULB WET BULB DRY BULB WET BULBIndoor Operation Range Maximum °C 32 23 32 23Minimum °C 16 11 16 111. Cooling capacities are based on indoor temperature of 27°C DRY BULB (80.6°F DRY BULB), 19.0°C WET BULB (66°F WET BULB) andoutdoor air temperature of 35°C DRY BULB (95°F DRY BULB), 24°C WET BULB (75.2°F WET BULB)2. Specifications are subject to change without notice for further improvement.