4REMOTE CONTROLPress the remote control’s button1 TO TURN ON OR OFF THE UNIT POWER• Please be aware of the OFF indication on the remotecontrol display to prevent the unit from starting/stoppingimproperly.2 TO SET TEMPERATURE• Selection range: 16°C ~ 30°C.• Operating the unit within the recommended temperaturecould induce energy saving.HEAT mode : 20°C ~ 24°C.COOL mode : 26°C ~ 28°C.DRY mode : 1°C ~ 2°C lower than room temperature.3 TO SELECT OPERATION MODEAUTO mode - For your convenience• During operation mode selection the power indicatorblinks.• Unit selects operation mode every 10 minutes accordingto temperature setting and room temperature.HEAT mode - To enjoy warm air• Unit takes a while to warm up. The power indicator blinksduring this operation.COOL mode - To enjoy cool air• Use curtains to screen off sunlight and outdoor heat toreduce power consumption during cool mode.DRY mode - To dehumidify the environment• Unit operates at low fan speed to give a gentle coolingoperation.Maximum distances: 8mDRYFAN SPEEDMODETEMPOFF/ONTIMERSETCANCELONOFF1 2 3SET CHECK CLOCK RESETAC RCAUTOHEATCOOLAIR SWINGFANSPEEDAIRSWING3 45679Remote Control display1824 TO SELECT FAN SPEED (5 OPTIONS)FAN SPEED• For AUTO, the indoor fan speed is automatically adjustedaccording to the operation mode.5 TO ADJUST AIRFLOW DIRECTION(5 OPTIONS)AIR SWING• Keeps the room ventilated.• In COOL/DRY mode, if AUTO is set, the louver swingleft/right and up/down automatically.• In HEAT mode, if AUTO is set, the horizontal louver fix atpredetermined position. The vertical louver swing left/rightafter the temperature rises.6 Press and hold for 5 seconds to dim or restore theunit’s indicator brightness.7 Press and hold for approximately 10 seconds toshow temperature setting in °C or °F.8 Press to restore the remote control’s default setting.9 Not used in normal operations.INDICATORPOWER (Green)TIMER (Orange)