52. Specification2.1 CS-RE9JKE CU-RE9JKEItem Unit Indoor Unit Outdoor UnitkW 2.50(0.90~3.00)CapacityBTU/h 8530(3070~10230)W/W 3.57(4.74~3.00)EERBTU/hW 12.18(16.16~10.23)dB(A) Hi: 42 Lo: 27 QLo: 22 Hi: 47COOLING Noise LevelPower level dB 53 60kW 3.30(0.90~4.10)CapacityBTU/h 11250(3070~13980)W/W 4.02(5.29~3.57)COPBTU/hW 13.71(18.06~12.16)dB(A) Hi: 42 Lo: 27 QLo: 25 Hi: 48HEATING Noise LevelPower level dB 53 61l/h 1.4Moisture Removal(pt/h) 2.4Lo m3/m (ft3/m) 8.51 (300) -Me m3/m (ft3/m) 10.81 (381) -Air VolumeHi m3/m (ft3/m) 13.8 (487) 28.9 (1020)Refrigerant Control Device - Capillary TubeRefrigerant Oil (Charged) cm 3 - RB68A or Freol Alpha68MRefrigerant (Charged) R410A kg (oz) - 0.81 (28.5)Height mm (inch) 290 (11-15/32) 540 (21-1/4)Width mm (inch) 848 (33-13/32) 780 (30-23/32)DimensionDepth mm (inch) 204 (8-1/32) 289 (11-3/8)Net Weight kg (lbs) 9.0 (20) 28 (62)Gas mm (inch) 9.52 (3/8)PipeDiameter Liquid mm (inch) 6.35 (1/4)Pipe Length m (ft) 3 (9.8) - 15(49.2)Height Difference m (ft) 5 (16.4)Additional Gas Amount g/m (oz/ft) 20 (0.2)Refrigerant Charge Less m (ft) 7.5 (24.6)Inner diameter mm 14 -Drain HoseLength mm 500 -Type - RotaryMotor Type - Induction (6-poles)CompressorRated Output W - 750Type Cross-Flow Fan Propeller FanMaterial AS PPMotor Type Induction (8-poles) Induction (6-poles)Input power W - -Output power W 30 15Lo rpm 740 -Me rpm 940 -FanFanSpeedHi rpm 1200 750Fin material Aluminium (Pre Coated) Aluminum ( Pre Coated)Fin type Slit Fin Slit FinRow x stage x FPI 2 x 15 x 19 1 x 24 x 17HeatExchangerSize (W x H x L) mm 610 x 315 x 25.4 709 x 504 x 18.2Material P.P.HONEY COMB -Air FilterType Style One-Touch -1. Cooling capacities are based on indoor temperature of 27°C Dry Bulb (80.6°F Dry Bulb), 19°C Wet Bulb (66.2°FWet Bulb) and outdoor air temperature of 35°C Dry Bulb (95.0°F Dry Bulb), 24°C Wet Bulb (75.2°F Wet Bulb).2. Heating capacities are based on indoor temperature of 20°C Dry Bulb (80.6°F Dry Bulb) and outdoor airtemperature of 7°C Dry Bulb (44.6°F Dry Bulb), 6°C Wet Bulb (42.8°F Wet Bulb).