Air Circulation Mode Operation Time DiagramStandard for Determining Operation Mode8.3. Air Circulation Mode Operation• When the temperature near the ceiling reaches the setting temperature, Air Circulation Mode operation commences at lowairflow volume. It stops when the temperature drops to 2°C below the setting temperature.8.4. Automatic Mode Operation• Indoor fan operates at SLo fan speed for 25 seconds.• After judging indoor air temperature, the operation mode is determined and operation continued at the mode determined.• After the operation mode has been determined, the mode does not change. However, Soft Dry mode operation includesCooling mode operation.• Room temperature adjustment.The following are added to the setting temperature specified as above.• The mode judging temperature and standard setting temperature can be increased by 2°C, by open the circuit of JX1 at indoorelectronic controller.30CS-V9BK PG CU-2 V14B KP5G / CS-V9BKP G CU-2 V18B KP5G / CS-V9BKP G CU-3 V20B KP5G / CS-V7BKP G CU-2 V19B KP5G / CS-V12B KPG