5 ENGLISHENGLISHENGLISHENGLISH4)-%2● , , and operations are available in allmodes and could be cancelled by pressing the respective buttonagain.● and or and operations could not beactivated at the same time.● and operations could be activated even when theair-conditioner is turned off. In this condition, once e-ion indicatoris ON, the unit will operate with AUTO fan speed and air swing.TO MONITOR AIR QUALITY• This setting enables the patrol sensorto automatically detect the air quality.• When the air quality is unsatisfactory,e-ion operation will start automatically.• When ON Timer is set, the unit may start earlier (upto 30 minutes) before the actual set time in order toachieve the temperature you preferred.• The timers repeat daily once set.• If there is a power failure, you can restore theprevious setting (once power is resumed) by pressingthe button.• If the timer is cancelled, press to restore theprevious setting.● The timer is based on the time set in the remotecontrol.● You can set your preferred time for ON and OFFtimers.TO ENJOY QUIET ENVIRONMENT• This setting provides a quiet environment byreducing the airflow noise.TO SELECT FAN SPEED• There are 5 fan speeds, as well asautomatic*.* For automatic fan speed, the speedof the indoor fan is automaticallyadjusted according to the operation.TO ACHIEVE TEMPERATURE QUICKLY• This setting enables the desiredtemperature to be reached quickly.• POWERFUL operation will run for 20minutes, after that this operation will stopautomatically.Select ONor OFFtimer.Set thedesiredtime.Confi rmthe setting.Hints■ Temperature setting of 1°C higher in cool mode or2°C lower in heat mode than the desired temperatureperforms a 10% power saving.■ To reduce power consumption during cool mode, closethe curtains to prevent the sunlight and heat fromcoming in.■ To disable the PATROL operation during unit start with, press and hold for 5 seconds thenrelease.To reset, press again for 5 seconds thenrelease.■ To set either 12-hour (am/pm) or 24-hour timeindication, press and hold for approximately 5seconds.■ To dim the indicator display on the air conditioner:Press and hold for 5 seconds.To reset, press again for 5 seconds.■ To switch the temperature setting to °C or °F, press andhold for approximately 10 seconds.To cancel ON or OFF timer, pressor , then press .• When you want the air conditioner to turn ON or OFFautomatically at a preset time.TO SET THE TIMERFEATURE OPERATIONFEATURE OPERATIONFEATURE OPERATIONFEATURE OPERATION TIMER SETTINGTIMER SETTINGTIMER SETTINGTIMER SETTING● To turn off the air conditioner, press .TO ENJOY CLEAN AIR• This setting provides clean air by producingnegative ions to attract dust which will thenbe captured at the positively charged e-ionfilters.TO ADJUST AIRFLOW DIRECTION• Keeps the room ventilated.• There are 5 options for vertical airflowdirection.• If automatic vertical airflow directionhas been set, the louvers swing up/down automatically.• In heat mode, the air blows horizontallyfor a while, then starts to blowdownwards.• Do not adjust the vertical airflowdirection louvers by hand.• Horizontal airflow direction louver ismanually adjustable.