Operation modeAUTO : During operation mode selection the POWER indicator blinks.• Unit selects operation mode every 10 minutes according to setting temperature and room temperature.HEAT : Unit takes a while to warm up. The POWER indicator blinks during this operation.COOL: Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode.DRY : Unit operates at low fan speed to give a gentle cooling operation.• For system which HEAT mode has been locked, if operation mode other than HEAT is selected, the indoor unit stopsand the POWER indicator blinks.ECONAVINoteAIR SWING When manual AIR SWING is selected,the ECONAVI operations will becancelled.The unit will start to initialise(for approximately 1 minute)The human activity sensorand the sunlight sensor willstart to detect.Human activity sensor operationECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy.Mode Human Low activity Normal activity High activity AbsentCOOL/DRY Settemperature+1°C+2°CHEATECONAVIPrecise control of temperature during low activity to maximise energy saving.Mode Human Low activityCOOL/DRY SettemperatureECONAVI take advantage of the human nature thathuman being takes time to feel the temperature riseduring low activity level; the unit adjusts temperature tomaximise energy saving without sacrificing the comfort.-2 °C-2 °CSunlight Sensor operationSettemperatureHEATCOOL/DRY +1 °C-1 °C -1 °CECONAVI ; Detecting sunlight intensity, the unit adjust temperature to save energy.Ambient conditionModeECONAVI is activated,the unit maintains settemperature until a highsunlight intensity is detected.The sunlight sensor detectssunlight intensity duringweather or day/nightchanges, and the unit adjuststemperature.• In a room without window or with thick curtain, the sunlight sensor will judge as cloudy/night.10To learn more...