9 EnglishNote, , , SLEEP,• Can be activated in all modes and can becancelled by pressing the respective buttonagain.• Cannot be selected at the same time.• Cannot be activated during MILD DRY.To set the timer2 sets of ON and OFF timers are availableto turn ON or OFF the unit at different presettimes.ONOFFTIMERCANCELSETCANCEL21 31 Select ON or OFFtimerExample:OFF at 22:00• Each time pressed: OFFCancel2 Set the time3 Confirm SETTIMER• To cancel ON or OFF timer, press ON or OFFto select respective or then press CANCEL .• If timer is cancelled manually or due to powerfailure, you can restore the timer again bypressing ON or OFF to select respective orthen press SET .• The nearest timer setting will be displayed andwill activate in sequence.• When ON Timer is set, the unit may startearlier (up to 35 minutes) before the actualset time in order to achieve the desiredtemperature on time.• Timer operation is based on the clock set inthe remote control and repeats daily once set.For clock setting, please refer to Quick guide.See “To learn more...” for details.How to useTo enjoy freshness and cleanerenvironmentnanoe• This operation moisturizes your skin andhair, reduces odor and inactivation of allergicparticulars such as pollen in the room.MILD DRY To improve humidity andmoisture level• This operation reduces air dryness and providesyou with a comfortable living environment duringCOOL mode only.• When vertical airflow direction is set to AUTO, itstops at lower position to avoid cold air contact.However, you can adjust the louver directionmanually.AIR SWING To adjust airfl ow directionRemote control display• Keeps the room ventilated.• In COOL/DRY mode, if AUTO is set, the louverswings left/right and up/down automatically.• In HEAT mode, if AUTO is set, the horizontallouver is fixed at the predetermined position.The vertical louver swings left/right after thetemperature rises.• Do not adjust the louver by hand.Auto Restart Control• If power is resumed after a power failure, theoperation will restart automatically after a periodof time with previous operation mode and airflowdirection.• This control is not applicable when TIMER is set.