Panasonic CW-C241SE Service Manual

Contents

CW-C241SE– 5 –HOW TO INSTALL3. Drain Water....To get the maximum cooling efficiency this air conditioner is designed to splash the condensate on the condenser coil.This method is called “Slinger-Up System”.If the splashing sound annoys you, you can provide an outside drain by using the following procedure which may, however causea small loss of performance.1. Slide out the chassis from the cabinet.2. Remove the rubber plug from the body base plate.3. Install the drain pan prepared in the accessory kit to the corner of the cabinet with 2 screws.4. Connect the drain hose to the outlet on the drain pan bottom.5. Slide the chassis into its original place in the cabinet.Note: Drain hose or tubing can be purchased locally to satisfy your particular needs.4. Plug line cord into wall receptacle.<230–220V, 50Hz>• Power should be from independent circuit.EXTERNAL VIEWINTERNAL VIEWBOTTOM-SIDE VIEW WITH DRAINPAN AND HOSE IN PLACESCREWSDRAIN PANDRAIN HOSEInstall drain pan at left corner of cabinet.