Panasonic CX-DH801N Operating Instructions Manual

Also see for CX-DH801N: Brochure & specs

Contents

Panasonic CX-DH801N Operating Instructions Manual Manual pdf 20 page image

39CX-DH801N38 English38 CX-DH801N37 EnglishTroubleshooting, Maintenance38Troubleshooting (Continued) MaintenanceError Display Messages■ DVD Changer (Control unit / Monitor display)Problem Possible cause a Possible solutionProduct ServicingIf the suggestions in the charts do not solve the problem, werecommend that you take it to your nearest authorizedPanasonic Service centre. The product should be servicedonly by a qualified technician.If the Unit Begins toMalfunction...Reset switchInsert a hard, slender stick straightforward into the hole andpush the switch.ImportantPush the switch only when the unit fails to operate with anybuttons. (Stored settings and adjustments are not cleared.)If the unit fails to return to normal condition, call the nearestPanasonic Service centre and ask for repairs.Caution on CleaningYour product is designed and manufactured to ensure aminimum of maintenance. Use a dry soft cloth for routineexterior cleaning. Never use benzine, thinner or other sol-vents.AlcoholPesticideWaxBenzineThinnerProduct ServicingUse fuses of the same specified rating (5 A). Using differentsubstitutes or fuses with higher ratings, or connecting theunit directly without a fuse, could cause fire or damage tothe unit.If the fuse blows frequently, there may be somethingwrong with the unit. Consult your nearest PanasonicService centre for service.Reset SwitchHAM4X5mmMAXBCVH.AHC V.A.BVBCNo magazine is in the changer.aLoad the changer with disc-loaded magazine.NO MAGAZINENo disc is in the changer.aInsert disc into the disc tray.NO DISCAn attempt was made to play a disc with a region number other than “2” or“ALL”. Or, the unknown error related with discs occurs.aCheck the disc.- E 6 -(Control unit display)(REGION ERROR etc.)(Next disc will be selectedautomatically after 5 seconds.)No operation by some cause.aOnce turn the ACC switch off, and turn it on again. And, push the resetswitch (a next page). If these operations fail, call the store where youpurchased the unit or the nearest Panasonic Service centre.- E 3 -(Control unit display)(Next disc will be selectedautomatically after 5 seconds.)Disc has scratches.aCheck the disc.- E 2 -(Control unit display)(Next disc will be selectedautomatically after 5 seconds.)Disc is dirty, or is upside down.aCheck the disc.- E 1 -(Control unit display)(Next disc will be selectedautomatically after 5 seconds.)Note: There may be cases when the disc numbers affected by an error are displayed before E1 and E2.■ DVD Changer (Monitor display)An attempt was made to play a disc with a region number other than “2” or“ALL”.aCheck the disc.REGION ERROR(Next disc will be selectedautomatically after 5 seconds.)The type of disc that is selected is not supported.aCheck the disc.THIS TYPE OF DISCCANNOT BE PLAYED.(Next disc will be selectedautomatically after 5 seconds.)The mechanism of DVD changer has failed.aOnce turn the ACC switch off, and turn it on again. And, push reset switch(a next page). If these operations fail, call the store where you pur-chased the unit or the nearest Panasonic Service centre.MECHANICAL ERRORDisc is dirty, or is upside down, or has scratches.aCheck the disc.PLAYBACK ERROR(Next disc will be selectedautomatically after 5 seconds.)Fuse (5 A)