Panasonic CY-VHD9500U Operating Instructions Manual

Also see for CY-VHD9500U: Operating instructions Instalation guide Installation instructions

Contents

Panasonic CY-VHD9500U Operating Instructions Manual Manual pdf 9 page image

20 CY-VHD9500U CY-VHD9500U 21Before InstallationENGLISH1ENGLISH230e30eDisplay Unit Lateral AngleAdjustmentYou can swivel it to the left and right, 30˚ each way.Hold the display unit by the non-slip part in theupper half of it and adjust its lateral angle.Maximum120eOpen the Display Unit1 Push the display release button (PUSH OPEN)until the display is unlocked.(Press the button with one hand while holdingthe display with the other.)2 Open the display unit by both hands until acomfortable viewing angle is reached.Close the Display UnitMove the display unit by both hands until thedisplay release button is locked.Note:≥ Always use both hands to open or close thedisplay unit.≥ Always check that the display release button islocked after closing the display unit.≥ If the display unit cannot be locked, be sure toconsult your dealer and remedy the situation.(PUSH OPEN)Safety Installation DiagramWARNING:≥ Have a professional technician wire and install the product.Professional skill and experience is required to wire and install the product. Improper installationcould result in failure of safety equipment resulting in accident and injury. For safety’s sake,always ask the store from which you purchased the product to install and wire it for you.Approximately 515/16q (150 mm)*Approximately1113/ 16q(300 mm)Maximum120˚Approximately1113/ 16q(300 mm)≥ This unit opens and closes at the maximum dimensions given below.* Install the product in such a way as to maintainthe distances shown even when the display unitis rotated by 30˚ toward the front seat headrest(page 21).Installation angle: Less than 20˚Perform the adjustment below in order to provide the installation range shown in the figure on the left.