Panasonic CY-VM1500EX Operating Instructions Manual

Also see for CYVM1500EX - CAR COLOR LCD MONITO: Operating instructions

Electrical ConnectionsCautions:•To prevent damage to the unit, be sure to follow the connection diagram below.• Remove approx. 5 mm of protective covering from the ends of the leads before connecting.• Do not insert the power connector into the unit until the wiring is completed.• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis.Bundle all cables and keep cable terminals free from touching any metal parts.Cable wiring diagramBasic system configurationCX-DV1500 (Rear)Accessories for useAUDIO VIDEODisplay Unit(Be sure to install the display unitat least 1 rr> away from the controller unit.)No. Part Qty© Connection cable 1o Power Connector 1BATTERY LEAD(^P (Connect to the car battery)Not UsedGROUNDX (Connect to a dean, baremetallic part of your vehicle.)PARKING BRAKECONNECTION LEADREMOTE CONTROL SIGNALRECEIVER CORDPOWER(connect to the ACC powersource in the car)When connected to the lead coloredin dark blue of the Panasonic CDreceiver or cassette receiver havinga AUX-IN input terminal, instead olconnecting to the ACC power source,the power of unit can be linked tothat ofFuse (3BlackAccessory Power Source (ACC Power Source)Input Lead (12V DC)To spots where the power sourceis cut when the engine key is removed.Do not connect to spots which havea constant power source.Lay the wire so that it does not geltangled up with screws or the movingparts of seat rail.Ground LeadTo the vehicle chassis metal.CO ChangerControl ConnectorCQ-DF88EUCCQ-DFX888LENCQ-DFX777EW laANTENNADark BlueConnecting the power sourceNotes:• This monitor system is designed only for use with a 1 2 volt DC motor vehicle.• Be sure to fully plug in the connector.• Install the cord to avoid high-temperature spots and secure with clampers and tape.• When game devices are connected, the image may be unstable.• When removing the DIN plug, be sure to press the clip.CY-VM1500EX 31