Panasonic CZ-RE2C2 Instruction Manual

Also see for CZ-RE2C2: Installation manual

Contents

EN-314. Alarm indicationThis displays alarm messages when an erroroccurs.5. Operation Mode indicationDisplays the selected operation mode.(AUTO /HEAT /DRY /COOL /FAN ).7. Temperature indicationIndicates the set temperature.8. °F / °C (Temperature unit) indicationDisplay Section1. (Fan mode select)indicationThe selected fan mode is displayed./ / /4. (Outing) indication( Outing Function)Appears when the outing function is set.2. (Flap position) indicationIndicates the flap position.6. Upper and lower limit indication of theouting function: Indicates the upper limit of thetemperature: Indicates the lower limit of thetemperature9. (Remote control sensor) indicationAppears when the remote control sensor isused.10. (Centralized control) indicationAppears when operated in centralized control.If the remote control operation is not permittedto the remote unit, when the (Start/Stop)button, (Mode select) button,(Fan speed) button, (Swing/Air direction)button or (Temperature setting)buttons are pressed, flashes andrejects the change.11. (Disabled feature) indicationDisplayed if the selected feature was disabledduring installation.13. (Caution) indicationAppears when the protective device isactivated or when an abnormality occurs.15. (Oil) indicationAppears when the engine oil needs to bechanged. (Appears when the gas heat pumpair conditioner is used.)3. (Swing) indicationAppears while the flap swings.12. (Heating standby mode) indicationappears when the fan of the indoor unit isstopped or in low fan speed.EN