Panasonic CZ-RWSU2 Instruction Manual

Also see for CZ-RWSK2: Quick reference Operating instructions Operating instructions Quick reference Operating instructions

Contents

EN-18Note• The Test Run/On and Test/On switches are for use when the unit is installed and test run. It is not for normaluse.• If the [Normal/Stop ALL] switch is on Stop ALL, the unit cannot receive signals from the remote control.CZ-RWSC2/CZ-RWSL21. Press [Emergency Operation] of the receiver.If the indoor temperature is 24 °C or greater when the unit starts running, it will act as a cooler.If the indoor temperature is less than 24 °C when the unit starts running, it will act as a heater.2. If you press , the wind direction automatically oscillates up and down.Stop: press [Emergency Operation] of the receiver again.2 1CZ-RWSL2 CZ-RWSC212Note• The Test Run/On and Test/On switches are for use when the unit is installed and test run. It is not for normaluse.• If the [Normal/Stop ALL] switch is on Stop ALL, the unit cannot receive signals from the remote control.12. Emergency Operation (Cont.)

/ 23

Related manuals for Panasonic CZ-RWSK2