57more minutes with the SD Video Cameraon Windows Media Player, these files maybe stopped. Also, when using these fileson SD-MovieStage, you may fail in [Play],[Cut edit] or [Convert]. In this case, click[Windows Media Update] on theinstallation screen or [WMP9QFEInst.exe]in [WMP9QFE] folder on the CD-ROM andfollow the messages to update WindowsMedia Player. (This update is effectivewhen you play back these files withWindows Media Player and the playbackis stopped about 3 or 4 minutes later.)≥To play back files recorded with[Extra fine] without installingSD-MovieStage Ver.2.5, install [MPEG4Decoder Plug-in] on the CD-ROM(supplied).≥When MPEG4 moving picture recorded by[Extra fine] is played back with other PCs(Windows Media Player 6.4 or later),re-change it using [Convert] function of theSD-MovieStage Ver.2.5.1Start the SD-MovieStage Ver.2.5.2Copy the MPEG4 file recorded by[Extra fine] to the hard disk of the PCwith the SD-MovieStaeg Ver.2.5.(Refer to page 16 of the PDF-basedinstruction of the SD-MovieStageVer.2.5.)3Select the file copied to the hard diskand click [Convert]. (Refer to page 41of the PDF-based instruction of theSD-MovieStage Ver.2.5.)4Select [D-snap (SV-AV25/AV50)] on[Output format] and select [High] on[Quality].5Click [OK].Before RequestingServicePower1: The SD Video Camera power cannotbe turned on.1-1: Is the power source connectedcorrectly?1-2: Is the Battery fully charged? Charge itwith the AC Adaptor.2: The SD Video Camera power shutsoff automatically.2: If you do not use the SD Video Camerafor more than 5 minutes, the powershuts off automatically to save theBattery power.3: The SD Video Camera power doesnot stay on long enough.3: Is the Battery low? Charge the Batteryor attach a fully charged Battery.Battery1: Battery runs down quickly.1-1: Is the Battery fully charged? Charge itwith the AC Adaptor.1-2: Are you using the Battery in anextremely cold place? In cold places,the operating time of the Batterybecomes shorter.1-3: Has the Battery worn out? If theoperating time is still short even afterthe Battery is fully charged, the Batteryhas worn out.Recording1: Recording does not start althoughpower is supplied to the SD VideoCamera and the Memory Card iscorrectly inserted.1-1: Is the SD Video Camera turned on?1-2: Is the write-protect switch set to[LOCK]? Being set to [LOCK], theMemory Card cannot be recorded.1-3: Does the Memory Card have enoughfree space? Delete useless data in theMemory Card.