14 DBS Manual - Issued 3/23/98 576-10-770Chapter 3. Modifying a Phonebook EntryThis Chapter describes how to modify names and telephone numbers in thePhonebook.Modifying NamesThis Chapter describes how to modify names recorded in the Phonebook.Note: If you do not hear Voice Guidance in response to saying "Go Back,""Change," "List," "Yes," "No," or "Name," press the Soft Key [EXEC] nextto the characters on the screen.1. Lift the handset and listen for the dial tone.2. Press the START/END (FF12 Key).The dial tone stops and Voice Guidance asks "Call Who?"3. After confirming the Large LED (Message LED) lights RED,say "Go Back."The TOP MENU is displayed and Voice Guidance respondswith "Ready."4. Say "Change."Voice Guidance responds with "Change who?".Note: If there is no registration in advance, "Phonebook Empty"will be issued.5. Say the name of the person or company, etc., to be modified.The system searches the Phonebook for the name closest to theone you have spoken, and Voice Guidance then asks "mm"Right?" to confirm the selection (mm). The telephone number isdisplayed on the 1st display.Note: Speak the name using the same voice you used to store thename in the Phonebook. Using a different tone of voice may resultin the name not being retrieved.Example: To modify "Panasonic"Say "Panasonic." ’Voice Guidance responds with thequestion '"Panasonic" Right?'.NAME TO CALL ?GO BACKREADY CALLPROGRAM CHANGENAME TO SELECT ?GO BACK LIST0459397360NO YES