Panasonic DBS576 User Manual
Also see for DBS 576 Section 300: User guideTechnical manualTechnical manualTechnical manualTechnical manual
                                                                                           | |
Contents
| 
3. Placing Outside Calls40 DBS 576 (USA), issued January 1999 576-20-7501. Pick up the handset or press the ON/OFF key.2. If necessary, access an outside line.3. Press the AUTO key.4. Enter the appropriate three digit speed dial bin number (PSD bins 80-99 or SSDbins 00-79 or 000-799).Checking Speed Dial NumbersAfter speed dial numbers have been assigned, you can check to see what number hasbeen programmed by using soft keys or by entering the speed dial bin number.Note: The following tasks require a display phone. To check speed dial numbers ona non-display phone, see Appendix B, “Customized PSD Bin Numbers” on page 81for your personalized list of speed dial numbers.1. Press the MODE key one time. (66' and 36' appear on the second line of thedisplay.)2. Press the soft key next to 66' or 36'. (The first two speed dial entries appearon the second line of the display.)3. Scroll through the speed dial directory until the desired speed dial bin entry isdisplayed. (To display the next two entries, press the # key. To display theprevious two entries, press the * key.)4. Pick up the handset or press the ON/OFF key.5. Press the CONF key.6. Press the soft key next to the speed dial entry. (The speed dial number appears onthe display.)1. From the Main Menu, press the soft key to the left of 6<67(0#',$/ or3(5621$/#',$/. (In the PSD directory, the first 10 speed dial entries aredisplayed. In the SSD directory, 10 alphabetical entries are displayed.)2. For the PSD directory, proceed to step 3.To check a speed dial number using the soft keys on a small-display phoneTo check a speed dial number using the soft keys on a large-display phone |
Related manuals for Panasonic DBS 576 Section 300
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine