Panasonic DIGA DMR-ES15 Operating Instructions Manual

Also see for DIGA DMR-ES15: Operating instructions Owner's manual Setup guide Setup guide Operating instructions

Contents

RQT831742Resetting channel settingRefer to the control reference on page 38.You can add or delete channels, or change programme positions.1 While stoppedPress [FUNCTIONS].2 Press [e,r] to select “To Others” andpress [ENTER].3 Press [e,r] to select “Setup” andpress [ENTER].4 Press [e,r] to select “Tuning” andpress [q].5 Press [e,r] to select “Manual” andpress [ENTER].To delete a programme positionPress [e,r,w,q] to select a programme position and press[A].To add a blank programme positionPress [e,r,w,q] to select a programme position and press[B].To move a TV station to another programme position1 Press [e,r,w,q] to select a programme position and press[C].2 Press [e,r] to select the new programme position towhich you want to assign the TV station and press[ENTER].After performing steps 1–5 (Ô left)6 Press [e,r,w,q] to select aprogramme position and press[ENTER].e.g.,Press [e,r] to select an item and press [q].Only for Asia, Middle East and South AfricaSetupTuningDiscPictureSoundDisplayConnectionOthersManualAuto-Setup RestartTABENTERSELECTRETURNManual TuningPos Name Ch Pos Name ChDeleteAddMove1234425810567891011121314151617181920ENTERRETURNSELECTARDZDFN3HR3BR3B CATo change detailed station settingsPos To change the programme position in which theTV stations are assignedPress [e,r] or the numbered buttons to select thenumber of the desired programme position andpress [ENTER].Name To enter or change the name of a TV stationPress [e,r,w,q] to enter station name and press[ENTER].If the station name needs a blank space, select theblank between “Z” and “ ”.Channel To enter newly available TV stations or changethe channel number of an already tuned TVstationPress [e,r] or the numbered buttons to enter thechannel number of the desired TV station.Wait a few moments until the desired TV station hasbeen tuned.After the desired TV station is tuned, press[ENTER].Fine Tuning To obtain the best tuning conditionPress [e,r] to adjust the best tuning conditionand press [ENTER].• Press [q] to return to “Auto”.VideoSystemTo select the video system typePress [e,r] to select “PAL” or “SECAM” if thepicture lacks colour, and press [ENTER].Auto: This unit automatically distinguishes PALand SECAM signals.PAL: For receiving PAL signals.SECAM: For receiving SECAM signals.• This setting is also available when you select theexternal input channel (AV1, AV2, AV3 or AV4) instep 5. In order to record properly, make theappropriate setting to match the connectedequipment.AudioModeTo select the audio reception typeIf sound quality is poor, press [e,r] to select itemsand press [ENTER].BG: PAL B.GI: PAL IDK: PAL D.K.K1Mono To select the type of sound to be recordedPress [e,r] to select “On” if the stereo sound isdistorted due to inferior reception conditions, or ifyou want to record the normal (mono) sound duringa stereo, bilingual or NICAM broadcast, and press[ENTER].Australia and N.Z.PosNameChannelFine TuningRETURN : leaveManualTuningMonoRETURNSELECT14AutoARDOff