RQT831743You can restart auto channel setting if the channel reception setting(Ô page 11) fails for some reason.After performing steps 1–4 (Ô page 42)5 Press [e,r] to select “Auto-SetupRestart” and press [ENTER].The confirmation screen appears.6 Press [w,q] to select “Yes” andpress [ENTER].• If the Country setting menu appears on the televisionPress [e,r] to select the country and press [ENTER].You can also use the following method to restart Auto-Setup.When the unit is on and stoppedPress and hold [2 CH] and [CH 1] on the main unit until theCountry setting screen or the Auto-Setup screen appears.• All the settings except for the ratings level, ratings password andtime settings return to the factory preset. The timer recordingprogrammes are also cancelled.To exit the screenPress [RETURN] several times.To return to the previous screenPress [RETURN].List of TV Reception ChannelsTV SystemRefer to the control reference on page 38.Change this setting if you connect an NTSC television or to recordNTSC video from another source.1 While stoppedPress [FUNCTIONS].2 Press [e,r] to select “To Others” andpress [ENTER].3 Press [e,r] to select “Setup” andpress [ENTER].4 Press [e,r] to select “Connection”and press [q].5 Press [e,r] to select “TV System”and press [ENTER].6 Press [e,r] to select the TV systemand press [ENTER].• PAL (factory preset)– Select when connecting to a PAL or Multi-systemtelevision. Programmes recorded using NTSC are playedas PAL 60.– Select to record television programmes and PAL input fromother equipment.• NTSC– Select when connecting to an NTSC television. Televisionprogrammes cannot be recorded properly.– Select to record NTSC input from other equipment.The confirmation screen appears.7 Press [w,q] to select “Yes” and press[ENTER].To exit the screenPress [RETURN] several times.To return to the previous screenPress [RETURN].n To change the setting all at once (PAL ↔ NTSC)While stopped, press and hold [g] and [; OPEN/CLOSE] on themain unit at the same time for about 5 seconds.Automatic settingTunerSystemChannelCoverage VHF UHF CATVPAL-B Australia 0-12 28-69 45 MHz–470 MHzPAL-BG New Zealand 1-11 21-69 44 MHz–470 MHzTuner System ChannelCoverage VHF UHF CATVPAL-DK,SECAM-DKK1 OIRT R1-R12 21-69 44 MHz–470 MHzPAL-BGH,SECAM-BG CCIR E2-E12 E21-E69S01-S05M1-M10, U1-U10S21-S41PAL-I HongKong – 21-69 –PAL-D China 1-12 13-57 Z1-Z35Tuner System ChannelCoverage VHF UHF CATVPAL-BGH,SECAM-BG CCIR E2-E12 E21-E69S01-S05M1-M10, U1-U10S21-S41For Australia and N.Z.For Australia and N.Z.For AsiaFor Middle East and South AfricaSetupTuningDiscPictureTV SystemPALNTSCResetting channel setting/TV System