VQT3A5524PreparationNote• Remove the battery after use. Store the removed battery in the battery case (supplied).• The battery will be exhausted if left for a long period of time after being charged.• Before removing the battery, turn the camera off, and wait until the status indicator has gone offcompletely. (Otherwise, this unit may no longer operate normally and the card itself may bedamaged or the recorded pictures may be lost.)• The supplied battery is designed only for the camera. Do not use it with any other equipment.• The battery becomes warm after using it and during and after charging. The camera alsobecomes warm during use. This is not a malfunction.∫ Battery indicationThe battery indication is displayed on the screen.[It does not appear when you use the camera with the AC adaptor (DMW-AC8G; optional)connected.]• The indication turns red and blinks if the remaining battery power is exhausted. (The statusindicator also blinks) Recharge the battery or replace it with a fully charged battery.∫ Recording still pictures (when using the LCD monitor)(By CIPA standard in Programme AE Mode)∫ Recording still pictures (when using the viewfinder)(By CIPA standard in Programme AE Mode)Approximate operating time and number of recordable picturesWhen the 14 – 140 mm/F4.0 – 5.8 lens supplied inDMC-GH2H is usedNumber of recordable pictures Approx. 320 picturesRecording time Approx. 160 minWhen the 14 – 42 mm/F3.5 – 5.6 lens supplied inDMC-GH2K is usedNumber of recordable pictures Approx. 330 picturesRecording time Approx. 165 minWhen the 14 – 140 mm/F4.0 – 5.8 lens supplied inDMC-GH2H is usedNumber of recordable pictures Approx. 330 picturesRecording time Approx. 165 minWhen the 14 – 42 mm/F3.5 – 5.6 lens supplied inDMC-GH2K is usedNumber of recordable pictures Approx. 340 picturesRecording time Approx. 170 min
