VQT3A48148Playback/EditingYou can enlarge and then clip the important part of the recorded picture.1 Select [CROPPING] on the [PLAYBACK] Mode menu. (P55)2 Press 3/4 to select [SINGLE] or [SINGLE IN BURST GROUP], and then press[MENU/SET].• When [SINGLE IN BURST GROUP] is selected, press 3/4/2/1 to select burst picturegroup, and press [MENU/SET] to proceed to step 3.3 Press 2/1 to select the picture, and then press [MENU/SET].4 Use the rear dial and press 3/4/2/1 to select the parts to be cropped.5 Press [MENU/SET].6 Press 3 to select [YES] and then press [MENU/SET].• Press [‚] to return to the menu screen.Note• Depending on the cut size, the picture size of the cropped picture may become smaller thanthat of the original picture.• The picture quality of the cropped picture will deteriorate.• It may not be possible to crop pictures recorded with other equipment.• Motion pictures, pictures stamped with [TEXT STAMP] and pictures taken with [ ],[ ] or [ ] cannot be cropped.• Information regarding the Face Recognition in the original picture will not be copied to imageshaving undergone [CROPPING].You can convert pictures taken with a [W] aspect ratio to a [Y], a [X] or a [ ] aspectratio.1 Select [ASPECT CONV.] on the [PLAYBACK] Mode menu. (P55)2 Press 3/4 to select [SINGLE] or [SINGLE IN BURST GROUP], and then press[MENU/SET].3 Press 3/4 to select [Y], [X] or [ ] and then press [MENU/SET].• When [SINGLE IN BURST GROUP] is selected, press 3/4/2/1 to select burst picturegroup, and press [MENU/SET] to proceed to step 4.4 Press 2/1 to select a picture taken with [W] aspect ratio, and then press[MENU/SET].5 Press 2/1 to determine the horizontal position, and press[MENU/SET] to set.• Use 3/4 to set the frame position for pictures rotated vertically.6 Press 3 to select [YES] and then press [MENU/SET].• Press [‚] to return to the menu screen.[CROPPING]Rear dial (right): EnlargementRear dial (left): Reduction3/4/2/1: Move? [ASPECT CONV.]
