VQT3A48162Connecting to other equipmentSaving the Recorded Still Pictures and MotionPicturesMethods to export still pictures and motion pictures to other devices will vary depending onthe file format. (JPEG, RAW, MPO, AVCHD, or Motion JPEG). Here are a few suggestions.∫ Copy by inserting the SD card into the recorderFile formats that can be used: [JPEG], [AVCHD]• See the instruction manual for the recorder about the details ofcopying and playing back.• Note that the equipment described may not be available incertain countries and regions.∫ Copy the playback image using an AV cableFile formats that can be used: [AVCHD], [Motion JPEG]Copy images played back with this unit to Blu-ray disk, DVD disc, hard disk, or video usinga Blu-ray Disk Recorder, DVD recorder, or video.This can be played back with equipment that is not compatible with high-definition(AVCHD), so it is convenient for distributing copies. Image will be standard quality insteadof high-definition at this time.1 Connect this unit with the recording equipment with an AV cable (supplied).2 Start the playback of this unit.3 Start the recording on the recording equipment.• When ending the recording (copying), stop the playback on this unit after stopping therecording in recording equipment.It is possible to copy onto Blu-ray disk, DVD disk, or hard disk by inserting an SDcard with still pictures and motion pictures recorded by this unit into a PanasonicBlu-ray Disk Recorder or DVD Recorder.Check the latest information about the equipment that can copy directly by inserting theSD card recorded by this unit, and equipment that is compatible with high definition(AVCHD) on the following website.http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)1 Yellow: to the video input socket2 White: to the audio input socket3 Red: to the audio input socketA AV cable (supplied)
