86Wi-Fi/NFCVQT5H82 (ENG)1 Press [Wi-Fi].2 Select [New Connection].3 Select the connection method.4 Select [PC].5 Select the connection method.Example: Selecting [WPS (Push-Button)] to set up a connection1Select [Via Network].2Select [WPS (Push-Button)].3Press the wireless access point WPS button until it switches toWPS mode.6 On the camera, perform the operation that matches yourpurpose.¢ When the PC you want to connect to is not displayed, select [Manual Input], and enter thecomputer name of the PC (NetBIOS name for Apple Mac computers).• To change the setting or disconnect, press [Wi-Fi]. (P77)• Folders sorted by the sent date are created in the specified folder, and pictures are saved inthose folders.• If the screen for a user account and password entry appears, enter the one you set on your PC.• When the computer name (NetBIOS name for Apple Mac computers) contains a space (blankcharacter), etc., it may not be recognised correctly.If a connection attempt fails, we recommend that you change the computer name (or NetBIOSname) to the one consisting of only alphanumeric characters, with a maximum of15 characters.Sending an image each time a recording is made([Send Images While Recording])Available file format: JPEG/RAW/MPOSelect and send the images([Send Images Stored in the Camera])Available file format: ALL formatSending an image each time a recording is made([Send Images While Recording])1 Select the PC you want to connect to and the destinationfolder.¢2 Take a picture with the camera.Select and send the images([Send Images Stored in the Camera])1 Select the PC you want to connect to and the destinationfolder.¢2 Select [Single Select] or [Multi Select], and then selectthe images you want to send.ョㄏヒヸㄊノョㄊ
