Application (Record)Using the [Rec] menu- 136 - VQT4J11• For the setting procedures of the menu. (→25)[Quality]Set the compression rate for still picture data.■ Settings[Fine] Gives priority to picture quality and saves pictures inJPEG file format.[Standard] Saves pictures in JPEG file format using standardpicture quality.[RAW+Fine] Saves pictures in JPEG file format in addition to theRAW file format.*1[RAW+Standard][RAW] Saves pictures in the RAW file format.*2[3D+Fine] Simultaneously saves 3D still picture data (MPO) andpictures in JPEG file format. (Only when [3D PhotoMode] Scene Mode is set.)[3D+Standard]*1 If you delete a RAW file from the camera, the corresponding JPEG file is also deleted.*2 You cannot set the picture size. (The pictures are saved using the maximumrecordable pixels for each image aspect ratio.)■About RAW fileYou can perform advanced editing of RAW pictures using the software (“SILKYPIXDeveloper Studio” developed by Ichikawa Soft Laboratory) on the CD-ROM (supplied).(The edited pictures can be saved in a file format such as JPEG that can be displayedon your computer.)